Actually, there is errors in the original schematic drawing that was never corrected, it was traced at the freestompboxes.org forums, if you go through the thread you can see photos of the board, what is mentioned as missing and/or incorrect.
sounds just like his Ut00b, but this one has a really high noise floor. wondering if that's just the nature of the space beast? either he's rolling back the volume on the guitar or someone must be turning down the pedal before bypass. 2N5088's, LM386N-1,
www.freestompboxes.org
First off, both pots are B100K Lin (this is mentioned but never gets corrected).
Second, the 1N5817's a drawn backwards, cathode should go to IC1 Pin 2 and anode to Pin 3 (tracer actually drew it like this at first, but changed it cause it looks like Escobedo's Rambler, never corrects this).
Third, the germanium is actually a 1N4148, not 1N34a (also mentioned, but tracer likes germanium better and never corrects it).
Fourth, there is a 22k resistor soldered onto the volume pot itself (not on the pcb) between lugs 1&2, which makes it parallel to the 1M that is also between lug 1&2, meaning it's more like 21.5k, which could be why the taper is off on the volume pot (this is also mentioned but never gets added).
I've drawn a new schematic with these corrections and it should now be a 100% clone of the Sepukku Space Fuzz.