Search results

FYI, the one I built ages ago did not do that.. I remember it being a pretty cool pedal, great tone.

15n will be fine. I would be VERY surprised if there was any difference.

Had mine in a few circuits, up to about a year old now, and they all still work great. No finish dings, still have a good, positive "click". None have seen heavy use, however; maybe 1-3 clicks a day..

Man, a week or so ago, I ordered some cheap russki paper-in-oil caps and totally forgot about it. I get an email yesterday that says "Sorry, cannot complete transaction, Russia invaded my country. Thank you.".. At the time I ordered, I was in my own self interested blindspot of the whole...

Tayda has these: https://www.taydaelectronics.com/m12-white-color-aluminum-nut-for-3pdt-footswitch.html They have a few other colors too.

Got into a bit about the pulse tube pre coolers.. WOW. Truly mindblowing for this layman. Using sound to cool down to just 7 Kelvin!?o_O

I guess I'm of the very few who prefer the "scratchiness" of the silicon version.. BC108..

I used Tayda's BB2, and it worked great! I would think higher gain may be beneficial, as the duocast has internal gain trim pots for high and low levels. Say it with me: "Use sockets and try a bunch!"

Just curious, but how did you find it's a 2 kHz frequency?

I breadboarded this one a while back! Sounds great through a LOUD amp. If you like it, I recommend checking out the Je T'aime. It's very similar, and a lotta fun too!

We have lift-off! Good luck!

Wow! The cooling systems on JWST are fascinating! I was studying it the other day, and was completely blown away. Incredibly brilliant!

Hey Chuck, have you used female molex connectors for quick led sockets?

That adapter is ac? Wow. It clearly says "output: DC 9.6V 200ma" can't it be trusted?

I use molex connectors every now and then, and I use a good pair of needle nose to crimp the pins onto wire. I've not had a problem with any of them, though, keep in mind I've had 30 years practice! I would definitely recommend them, they make for a good board connection. In my experience, pin...

I've used both, and there's not much difference. The top adjust MAY be a bit cheaper in construction, so may want to use it for voltage divider or something "set and forget" as opposed to a function you would need to adjust regularly..

Those knobs go great! Perfect!

Did you use the 4.7 v zener the BOM calls for? Did you mind the pinouts on the transistors? They appear different.. PICS

Andy should have plenty of volume. Been a while, but seem to remember unity at about 11 o' clock. Sounds like a wrong component somewhere.

You may be driving the tranny hard enough(tee hee) it goes into passing essentially a DC signal. (Saturation)Try higher input resistors.