Search results

Yeah the problem is that the board there is a Whammy, not a Whammy DT like mine, I should have written that in the thread title. C52 is just a basic SMD Cap on my board.

I sadly get no signal from my Tearjerker Wah build. The LED also is slightly on in bypass which seems really weird and makes me worried about my wiring (see photo). I am getting dry signal in bypass mode so that works fine (except the LED). Btw the LED is just for testing I want to put another...

Great build! Love the big Led. Made me also want to build one with a big LED. How did you wire up the switch? It is pretty hard to tell since you wrapped the cables together (looks really clean though, love it!). I just wired up mine like this and I am getting problems. No Signal with the Way...

Do you know what capacitor that would be on my board? Yeah I also get sound from the board when the power jack is unplugged.

All solder points of the DC In and Footswitches look good. I also measured the connections of the DC In and those seem to be fine. All (momentary) foot switches also work as I can tell by measuring. The jacks should also be fine since my dry signal is getting through right? Also I noticed that...

The Enclosure says 9V DC: This is the PS: Sorry for the bad picture, bad lighting.

I just got a DigiTech Whammy that is not working. Just plugged it in and I am only getting the dry signal through, no LED turns on, none of the switches seem to do anything. I don't really have a place to start so if anyone has a good idea where to start I'd appreciate anything you've got. I...

Ok I just build an audio probe and my Signal seems to be lost at Pin 7 of IC4.2. I am getting sound at Pin 6 and between R10 and R11. No sound at the other side of R10, Pin 7 of IC4.2 and Pin 3 of the Benton Brick. That should mean that at least one of these Pins has a short right? Edit: I was...

Thanks a lot! I had to clip 3 of the 6 legs (2 of the extra "connectors" and 1 of the "stabilizers") and bend one of them a tiny bit but got it to work now. Fits in pretty good and looks even better. Again thank you for your help!

Hello, I just got my handmade 500mH Inductor and I am not sure at all about how to solder it in. Maybe someone can help me out here. Since none of the holes really fit I will probably have to snip off/ bend some legs and maybe use hot glue to keep it in place, right? Also open for any other...

I just tried swapping the PT2399 (same batch as the one before though) but no difference, just the dry signal like in bypass mode. Still waiting for other PT2399's to come.

I just measured V+ at the PT2399 and I got 4.996V so I guess that shouldn't be the problem right?

Yeah you're totally right about that :D I just had those still laying around so I didn't want to order new ones without even trying them. I already had some fake J201 from eBay that really drove me crazy at my Benson Preamp build where nothing was working. I got some real ones and suddenly...

I think I double checked the voltage regulators but I'll measure PT2399 V+ when I get back in my workshop at the weekend. The 2399 came from eBay so it may be bad. If that's the problem the fix should be at least pretty easy by replacing the IC.

My spirit box build that I started a while ago doesn't seem to work properly. LED and Bypass work absolutely fine but when I turn the pedal on it only introduces some noice to the dry signal, its almost like its still in bypass. Also the PT2399 is getting insanely hot. I just reflowed all...

Any news on this? Also has anyone an idea where to get a small wah enclosure like the one of the Mini Wah from Dunlop?

Thanks, yeah I used a set of posca pens that I bought a while ago and it works quite nice. I also had friend of mine that can actually draw quite good paint an EQD Tentacle/ Squidward build for me that turned out really great. Maybe I'll find some time tomorrow to post some pictures. Edit: Just...

Hello, sadly I didn't think of taking a picture when I still had it open so the only thing I've got is this one. Also there are lots of cables inside because I didn't connect the LED's directly to the board but used some wires instead. I also added an extra foot switch (wired in parallel to the...