Search results

Never have I said “please take my money” more so than after I watched that 20 second demo. Lol. What kind of switching system is doing all that? As a lover of combo pedals, I can’t wait to build that!!

Success!! After ordering 2.1mm jacks from Tayda, they now fit the normal power plug. Here’s the side by side. Not much of a difference but you can see the barrel is slightly bigger on the right hand side (2.5mm) now I can finally use my 3in1 wiring boards to power multiple PCB’s in a classy...

Check out the other extensive threads on how to drill out the square hole for the DIP switch row. Should be under muffin factory or square hole in the search. Good luck!

99% sure I bought them from you. That’s why it’s so weird it doesn’t fit.

I think these have to be 2.5. I’ve tried as hard as possible to shove it in on 3 different DC jacks and no luck at all. I’ll reorder new ones and make sure it’s 2.1mm thanks everyone.

Ok. Good to know. Yeah I tried like 3 of them that I got and none went in. I’ll give it a little more oomph. I’ll try not to Hulk smash it! ??

I normally use a 2.1 DC jack that is the “standard” size. See on the right in the pictures below. What you’d get from Tayda. I’ve bought the Lumberg style DC jacks (On the left) from PedalPCB so it would 1) fit his pre-drilled enclosures 2) allow me to use the 3in1 DC board to power multi...

Once I found a good tone I liked, I haven’t touched the DIP since. Maybe some minor tweaking of pots when playing live, but that’s it. And I thought it was broken at first because all the DIP switches were off. Nice to hear it fire up as you turn them on! [upon taking a picture of my settings...

Hello all, completed the Leprechaun. I get the same bypass signal in both on and bypass. The Magin button is working and going nuts when I turn it on, so it’s the main fx signal path not working. when I run a audio probe, I get to the last pot (Tone/Regeneration) it can hear the pitch and...

Lol. Thanks. That’s my first freehand centaur. My friend who is getting the pedal is gonna do some art for it. I’ll try and post some follow up pics when he’s done.

After unable to fix the envelope filter, I had to shake it off and get my groove back. This was a fun project that was a request from a buddy of mine. A combined Kliché Mini and FV1 delay squeezed into to box. My friend actually uses this with his acoustic guitar so it is fun to see these pedals...

Yeah I definitely noticed that it got louder and more when in the down position. One trimpot clearly affects the range of the sweep. Is the other a gain pot? They’re not labeled anywhere.

Ok, I did the audio probe. Attached is a diagram of the spots where the sound gets muddy. I’m not sure exactly how to follow the signal path so forgive my errors. both trim pots seem to be losing the signal. I would either get a muddy sound or a very faint sound at best from the trimpots (leg...

I checked all the values. My 22k are 22.1k Will that be affecting it? Just realized I have 22k proper now but not sure if .1k will have a negligible effect. on to the audio probe now...

I double checked R21 and its a 51k

Ok here’s some back side shots of the board. I’ll start double checking the R values too. Thanks

Put it together tonight and fired it up. It turns on, LED works, bypass is fine. But when on, there’s a lot of gain and distortion coming through that certain isn’t part of it. You do hear the squish of the envelope filter, but it’s heavily distorted. here’s a couple gut shots. Any suggestions...

Of course I’m about to start my Mini Kliche after getting all those 1/8w resistors ?

I put in a Tayda order today and the components are still in stock. Enclosures however are almost all gone. Every color, every size. So that’s running out. I ended up getting a 1590XX because every single file 1590BB is sold out. Same for 125B too. ? but the orders are still shipping in 4 days...

Why is that illegal?