Search results

  1. E

    What jacks to use for dual effects loop switch?

    If nothing is plugged into the loop jacks, no sound will come out at all when you turn the switches on. But the sound comes through normally when the switches are off, assuming the signal can pass through the pedals in the loop
  2. E

    Using a 4PDT to switch two pots

    That’s perfect! Thanks so much!
  3. E

    Using a 4PDT to switch two pots

    I think this one is just for switching one pot. I need to switch 2 different pots with one switch
  4. E

    Using a 4PDT to switch two pots

    Thank you, I’m definitely in need of a diagram, if someone would be so kind
  5. E

    Using a 4PDT to switch two pots

    I think it can be done, but I’m struggling to wrap my head around it. I built a RAH clone from here and love it, I leave it on all the time. What I’d like to do is use a footswitch so that I can have a preset option. The switch would change from the stock volume and gain pots to a different...
  6. E

    Post your guitar that's been in a case too long

    Pulled this out to clean it up and maybe sell it, and ended up really liking it again
  7. E

    SOLVED Issues with Prince Albert overdrive build

    I think you’re right!!! I’ll remove these and replace. Thanks so much!
  8. E

    SOLVED Issues with Prince Albert overdrive build

    Hello, I’m having some issues with this build. The volume seems low, and there is way too much bass. Other tone controls work, but don’t add much. My voltages seem consistent, but may be wrong. For the 9.1 volt diode I used 1N4739A As you look at the board, the bs170 in the top left gives me...
  9. E

    Simulcast goodness!

    It’s an always on pedal for me. I use it like a pre amp
  10. E

    Help with an ampless rig build

    Currently I’m using a cab m plus, with the son of Ben sometimes, and a broadcast at other times.
  11. E

    Kliche Mini Fail

    I’m not sure that switch board is compatible with the kliche. The kliche has a buffer, so the routing on the switch pcb you’ve used would not match. I believe pedal pcb makes a kliche specific foot switch board. Aside from that, the soldering here looks a little suspect, unless you’re using lead...
  12. E

    What jacks to use for dual effects loop switch?

    That’s right
  13. E

    Gibson sends Mojo Hand FX cease and desist over Mister-O Phaser

    Not sure if it’s been covered, but the reason the guitars were destroyed was because they were all faulty in some way. The returns rate on this guitar were huge and they essentially couldn’t fix them. They were destroyed for insurance purposes so Gibson could claim back their loses. I would...
  14. E

    Rare components

    Resistors and capacitors are not super valuable. For diodes, germanium diodes are getting up there. Semiconductors carey the most value
  15. E

    Missing Build Docs / Schematics

    No rush, but for the brownout overdrive, could you please let me know what kind of toggle switch we need for this?
  16. E

    Chauffeur/Daily Driver OD - Too much gain?

    I have the opposite problem. Mine feels like it doesn’t even start breaking up until just past 50% on the gain knob
  17. E

    What Strings, yes, a STRINGS thread!

    I use 10’s. Lol
  18. E

    Barbershop / Chop Shop mods

    Sag should be very noticeable. Should be very gated
  19. E

    What jacks to use for dual effects loop switch?

    The jacks are ok, be careful with the power jack though. On Mine the center pin has started to loosen. There’s no way to get this out to fix it if the jack goes without desoldering the switch
  20. E

    Now Playing... What are you Listening to Right Now?

    This album has been in heavy rotation. https://massagetheband.bandcamp.com/album/still-life
Back
Top