Search results

I had a k40 style laser for pedal graphics that was just ok. Upgraded to fiber and it's so much faster. Here's a real time test. Still learning to get parameters but love it.

This isn't for a specific pedal, but I guess it's a mod. I'm building a Muroidea distortion. I wanted to run 2 leds in series to make eyes for the rat graphics on the pedal. I usually use a 4k7 clr with one led having a drop of 1k5ish. Do I just assume using 2 leds with a 1k5 drop in series I...

I just received a batch of 4 mini-muffin fuzz boards, and the build docs do not match. There are 8 resistors on the board, build doc has 7. The diodes are in a different place on the board (not a big deal, but just to highlight the difference). Do I build to the screen print on the board, or do...

This is my build of the Park and Ride. Little bit of gain and you can get a great position for your Money for nothing intro!! Versatile little pedal indeed.

Ok, so I know that some people hate blank boxes, but I just love the sand texture with the buttons so I didn't want to laser them or add a faceplate. Red knob is the little green scream machine and it sounds very nice. I'd like a bit more grunt on max gain, but still an excellent tube...

Putting this here since technically it's a mod. I built the little green scream machine, but didn't have any 2sc1815 so I socketed the transistor holes, insulated the legs and changed the position to match the pinout of the 2sc1815 and used some 2n3904 instead. So my question is this. I've...

I've built the green Russian, triangle and now the bigger muff variant on the muffin fuzz. All three sound great, but this or the green Russian are my favorites. Triangle is good, but not as good for me as the other two. Anyway, I got the glow in the dark enclosure from Tayda, thinking it...

Just realized I don't have any on hand. Almost finished the build. I feel like I have almost every thing but this. Is there a common equivalent I can use here?

First up. Fuzztopus. I used the GuitarPCB Emerald Ring Octave circuit into the PedalPCB Muffin Fuzz (I used the Triangle build from the docs here) Second is Urkel Haze, which is the GuitarPCB One Knob Fuzz (a Colorsound fuzz box type thing) Third, is Snuffy, the PedalPCB Snuffy take on the Zvex...

When I built my Kliche mini I just wired directly to the switch. So when I was building the Muffin Fuzz, I had the Kliche board for the footswitch and I used that. However, the LED comes on when the effect is off, so I'm wondering if the 2 boards are wired differently. I don't see build docs or...

This thing grunts. I don't have a bass but I'm sure it would sound great with it. Really does good with humbuckers. Also including a quick vid of how I do my faceplate since I was asked previously. I tried to upload directly, but it said it's too big so I had to put it on YouTube as a short...

First of all, mine ain't a Rat, it's a Snitch!! Holy crap I love the sound of this pedal. I used an Op07 I because I didn't have any of the 358s on hand and my experience has been, you either pay much more or get duds if you go cheap. This IC is readily available and sounds great. If you...

Hi all, just finished the Aft preamp and I used a 2N2222A since I didn't have an Oc139. Hfe was 275. It's super noisy, almost microphonic and seems like there's almost a delay before the sound kicks in. Just a weird vibe. The OC datasheet I looked at had the Hfe about 33. So my dumb fault...

If I want to add a momentary switch to give infinite delay on seabed pcb. I've seen to add one leg to leg 3 of feedback and the other to leg 3 of delay. Is it that simple?

Howdy all, I just finished up the Tweed 59. When engaged there's a bit of a volume drop, UNLESS I turn the tone all the way to the left. Then, it really cuts the high frequencies, but also boosts the volume. I reflowed everything. I have no bridge joints and I'm at a loss as to why this would be...

While it's pretty easy to figure out if you can read a schematic, thought I'd suggest adding labels to pots on boards where all pots are the same value. Not everyone reads schematics, so for labeling purposes, it could help them (off the top of my head I'm thinking things like the Byrdhouse...

Hi all, Not sure if this is a troubleshooting or mod question, but I think it's troubleshooting. Anytime I build a pedal, I set all the knobs to noon and see how close I am to volume without the pedal active. To get to unity volume I almost have to crank the volume the whole way up. That seems...

This pedal sounds amazing. One of the things I appreciate about pedal pcb is they tell you what the circuit is based on, so you can get an idea of the sound. I saw this was based on Lumpy's Tone Shop Lemon Drop, and immediately Pink Lemonade popped into my head for a name. I found the pink...

Hello all, Just built the lemonade pedal and it sounds absolutely killer. I'm not getting a very wide range with the filter knob. Looking at the schematic there's a 1m resistor going in and a 4u7 and 4n7 capacitor in the other side. If I dropped the 1m to 500k, would that increase my sweep...

I have a few pcbs from another manufacturer that has 4 knobs, so I ordered a couple of the 4 hole drilled enclosures from Tayda. But the boards I have mount the knobs differently so they would be too close to the input jacks if I use these enclosures. Anyway, waste not want not, I'll build a few...