6-Band EQ (potentiometer version) drill template error?

[vladimirsky]

howdy,
i've been driving myself insane trying to figure this out, but are the labels on the drill template for the pot version of the 6-band eq reversed? pot 1 controls the 100hz band, according to the schematic and the layout, but if you labeled them as the drill template suggests, that would be 400hz.

or have i fallen victim to mirrors reflecting mirrors reflecting mirrors?

L

 

[Bricksnbeatles]

The view of the PCB is from the component side, which faces the back.

 

[Dan M]

Looks like the build template labels are wrong. 100Hz would be bottom left when you install the pcb.

Maybe the top row is wrong too, but I can’t tell without seeing where pin 2 of those pots is connected.

 

[vladimirsky]

The view of the PCB is from the component side, which faces the back.

yeah.. that bit

Looks like the build template labels are wrong. 100Hz would be bottom left when you install the pcb.

Maybe the top row is wrong too, but I can’t tell without seeing where pin 2 of those pots is connected.

the whole thing is just mirrored. pot 6 is the high-pass CR filter