A B looper stomp board

[jimilee]

Does anyone make an AB looper stomp board? I'm going to try a "channel switcher" with a master bypass in a combo build.

 

[jcpst]

Not sure who makes a board. But something like this?

 

[CheapSuitG]

Like this?

Dual Effects Loop Switch - PedalPCB.com

Dual Effects Loop Switcher

www.pedalpcb.com

 

[DGWVI]

I haven't seen a board, but they're easy enough to wire up
I like this one from @Feral Feline's Switch-craft thread

 

[jcpst]

Oh yeah! I forgot about the tayda PCB. Good callout @DGWVI

https://www.taydaelectronics.com/dh-a14-guitar-effect.html

 

[jcpst]

Another option is to use two ppcb intelligent relay bypass boards. Connect the CTRL pads on two of them and use channel switching mode.

Channel Switching Mode​

Channel Switching Mode is designed for use in multi-in-one combination effects pedals. When Channel Switching Mode is enabled only one effect can be active at a time.
Pressing any footswitch automatically activates that effect and bypasses any other active effect on the same control bus. Pressing the active footswitch again bypasses the effect.

Intelligent Relay Bypass Module - PedalPCB.com

Relay Bypass Module

www.pedalpcb.com

 

[DGWVI]

Another option is to use two ppcb intelligent relay bypass boards. Connect the CTRL pads on two of them and use channel switching mode.

Intelligent Relay Bypass Module - PedalPCB.com

Relay Bypass Module

www.pedalpcb.com

This is what's in my big triple Rat. Works wonderfully except I do get a pop when switching channels


I don't have any issues with the 4PDT loop (no master bypass) selector, though

 

[jimilee]

Another option is to use two ppcb intelligent relay bypass boards. Connect the CTRL pads on two of them and use channel switching mode.

Intelligent Relay Bypass Module - PedalPCB.com

Relay Bypass Module

www.pedalpcb.com

Awesome!

 

[Feral Feline]

I've also used a GuitarPCB 2KnobJob PCB for a 2-x-Loop swapper-operator...




HIJACK ALERT!

What I want is Intelligent Relay where ONE (1) STOMPER is used both for bypass, quick stomp, AND stomp-hold switches the channels...

Does the PPCB Intelligent Relay do that?
If YES, do I use one stomper, but two IRelay boards?

 

[jimilee]

I've also used a GuitarPCB 2KnobJob PCB for a 2-x-Loop swapper-operator...

View attachment 97466


HIJACK ALERT!

What I want is Intelligent Relay where ONE (1) STOMPER is used both for bypass, quick stomp, AND stomp-hold switches the channels...

Does the PPCB Intelligent Relay do that?
If YES, do I use one stomper, but two IRelay boards?

Oh cool. I might have one laying around here somewhere.

 

[Feral Feline]

Oh cool. I might have one laying around here somewhere.

If you don't I can drop one into the post for you.

 

[jimilee]

If you don't I can drop one into the post for you.

Thank you sir.

 

[jimilee]

If you don't I can drop one into the post for you.

I sure do have one. I found it, couldn’t tell you how and when I got it. I should trace it or find a schematic to make more. Thanks again.