Behringer SF300 Super Fuzz

[u439857293874]

I just think it would be funny to make a pedal I could just buy for $20.

 

[Guardians of the analog]

this already exists. The behringer is a clone of the fz-2

Hyped Fuzz - PedalPCB.com

Compare to Boss FZ-2 Hyper Fuzz

www.pedalpcb.com

Hyped Boost - PedalPCB.com

Compare to Boss FZ-2 Hyper Fuzz (Clean Boost mode)

www.pedalpcb.com

 

[Fama]

Is it possible to do the "Fuzz 1.5" mode in the Hyped Fuzz? Where on the SF300 you slide the switch to between modes 1 and 2.

 

[u439857293874]

Is it possible to do the "Fuzz 1.5" mode in the Hyped Fuzz? Where on the SF300 you slide the switch to between modes 1 and 2.

I've seen a few threads about it. Here is one:

Hyped fuzz mod for in between setting like Behringer SF300​

 

[BuddytheReow]

Is it possible to do the "Fuzz 1.5" mode in the Hyped Fuzz? Where on the SF300 you slide the switch to between modes 1 and 2.

I did this by accident by using the wrong DPDT switch. Only the 2 fuzzes come through and boost is bypassed.

 

[jesuscrisp]

Well if we're really anal about it, the Hyped Fuzz isn't a true FZ-2 clone as the JFET buffer and discrete op amp gain stage were replace by IC stages instead...

 

[gri]

I did this by accident by using the wrong DPDT switch. Only the 2 fuzzes come through and boost is bypassed.

oooh what switch did you use? i dont really need the boost. i have a FZ2 but i want to maybe add a blend knob on this

 

[BuddytheReow]

oooh what switch did you use? i dont really need the boost. i have a FZ2 but i want to maybe add a blend knob on this

It was the one from tayda

 

[urwathrtz]

Couple years ago I bought an SF300 (Sweetwater has finally stopped calling me asking how my $24 purchase is going....). This isn't new news but, I saw some photos of the mod to install an external switch to jump out FUZZ 1. In FUZZ 2, juts switch on FUZZ 1. It works great! Instead of calling it a SF300 I call it an "MF300"