SOLVED Caesar Chorus click with Rate

[pryonisys]

Hello all, I put together the Caesar Chorus and it sounds great when engaged, but I'm having a problem when the effect is bypassed. The bypassed signal is clicking with the rate of the effect (each time the LED fully lights or dims I get a click). This does not happen when the effect is engaged, only when it's bypassed.

Has anyone else experienced this? Any thoughts for solutions?

 

[giovanni]

Sounds like it may be a short leaking the oscillator signal to the switch when the effect is off. Pictures may help.

 

[Feral Feline]

What kind of bypass are you running?

If it's 3PDT, you could try grounding the PCB's output in bypass mode.

More common to ground the input in bypass mode, from what I gather, but in this case it makes more sense to me to ground the board's output when bypassed.

 

[pryonisys]

Thanks for your responses, I'm a dope and found a solder bridge and now it works perfectly. Thanks again

 

[Travis]

Thanks for your responses, I'm a dope and found a solder bridge and now it works perfectly. Thanks again

Where did you found the brigde?

I have the same problem

 

[pryonisys]

Where did you found the brigde?

I have the same problem

Sorry for the delayed response.
If I'm remembering correctly my bridge was in one of these 2 points