D1chotomy
Active member
I just built the Distortion 250 and it works. Mostly. I had to change a couple values due to not having a few components on hand. I did not have a 47nF for C3, so I used a .082uF in place. Secondly, I used 1N4148 diodes. My issue is that the pedal works, but the taper on the volume control is not working properly. I get almost no gain what so ever until I hit the max position. Then it's full on gain. Is my choice of cap in C3 the issue or is it the diodes?
Thanks for your help.
Thanks for your help.