Electrovibe Build Docs

Robert said:
Like I said yesterday, we just sell lemonade, OK?

The preferred combination is 7371 lamp and 9203 LDR.

or
smallbear-electronics.mybigcommerce.com

Lamp, 12 Volt 0.04A Bi-pin #7371

New England's source for guitar pedals, pedal parts and electronics.
smallbear-electronics.mybigcommerce.com smallbear-electronics.mybigcommerce.com

and
smallbear-electronics.mybigcommerce.com

Photocells CdS 5mm Diameter

New England's source for guitar pedals, pedal parts and electronics.
smallbear-electronics.mybigcommerce.com smallbear-electronics.mybigcommerce.com



🦆🍋🍇
Click to expand...

The 9203 is out of stock at small bear. What is the next alternative?

Which of the photocells at Das Musikding would be the best substitute?

Photo Cells

Photo Cells: Photo cell 5k-10k, 0,2M - Photo cell 2k-6k, 0,15M - Foto-Resistor 45k-150k, 10M - Photo cell 8k-20k, 1M - Photo cell 45k-140k, 10M - LDR07 phot
www.musikding.de www.musikding.de

Or is there another online supplier you could recommend?
 
orangetones said:
The 9203 is out of stock at small bear. What is the next alternative?

Which of the photocells at Das Musikding would be the best substitute?

Photo Cells

Photo Cells: Photo cell 5k-10k, 0,2M - Photo cell 2k-6k, 0,15M - Foto-Resistor 45k-150k, 10M - Photo cell 8k-20k, 1M - Photo cell 45k-140k, 10M - LDR07 phot
www.musikding.de www.musikding.de

Or is there another online supplier you could recommend?
Click to expand...

Jameco and Digikey have them.
 
orangetones said:
Jameco, yes, but their minimum is $20 spend.

Which part at Digikey? I thought they had one with the same name, but different specs?
Click to expand...

It’s slightly different but not much. It’s similar to the 9200 from SBE so it’s still a suitable replacement if you can’t stomach the $20 minimum at Jameco.
 
Last edited:
Big Monk said:
I would stick with the Jameco or the Digikey units.
Click to expand...
Even when compared to the nsl-7532? Seems that one is similar to the digikey one? No? Just trying to not have to order from so many suppliers.

In all honestly, is be happy to order from jameco, but it will cost me like 30 plus usd to get 4 ldrs to Canada. Anyone want to sell me 4 of these and put them in an envelope to Canada? The minimum order amount and their shipping is crazy.
 
orangetones said:
Even when compared to the nsl-7532? Seems that one is similar to the digikey one? No? Just trying to not have to order from so many suppliers.

In all honestly, is be happy to order from jameco, but it will cost me like 30 plus usd to get 4 ldrs to Canada. Anyone want to sell me 4 of these and put them in an envelope to Canada? The minimum order amount and their shipping is crazy.
Click to expand...

The Digikey 9203 units are similar to the SBE 9200, which is also said to have good depth.
 
Kelmark1 said:
Looking for a source for the cabling to wire the footswith pcb board to the mainboard, the thick gray multi-conductive cabling I’ve seen in some build pictures of the ElectroVibe. Help a brother out?
Ray
Click to expand...
Go to your local computer store;
or find it on eBay/Amazon/Alibaba...

If you're getting pedal parts from SBP, they're here:

WIRE, CABLES & PLUGS - Ribbon Cables - StompBoxParts

stompboxparts.com stompboxparts.com

Tayda:

Search results for: 'ribbon'

www.taydaelectronics.com www.taydaelectronics.com

Mouser

Digikey
 
You must log in or register to reply here.

Similar threads

R
Electrovibe mini current draw
Replies
2
Views
177
Big Monk
Big Monk
J
  • Solved
Electrovibe grounding issue
Replies
8
Views
454
JHKcustoms
J
jessenator
Build Docs Archive?
Replies
6
Views
403
vigilante398
V
torcamaniac
  • Question Question
SOLVED Electrovibe LFO not working when Speed 2 selected
Replies
6
Views
359
torcamaniac
torcamaniac
K
  • Question Question
Electrovibe switch question
Replies
2
Views
243
swelchy
swelchy
Back
Top