END ALL DISTORTION WORKED ONCE

[delackattack]

I was thinking with this pedal yesterday and finally got around to producing sound out of it and sounded really good, but after I fixed the suspected problem, I get no sound when the pedal is engaged.

 

[carlinb17]

It looks like lugs 4 and 7 are backwards on your switch

 

[Barry]

Wouldn't that be 2 and 3

 

[carlinb17]

Wouldn't that be 2 and 3

I’ve always thought it is this, I could be wrong

 

[Barry]

I've seen it both ways, but your understanding does seem to be the majority

 

[Barry]

Then there's this

 

[delackattack]

Okay guys, swap the connections to lugs and it produces sound, just at a low volume with the level at max.
Maybe a poor connection to my 3PDT switch?

 

[delackattack]

As I took this, my pre bonded cable I had purchased had snapped off and all of these pre bonded ones from Love My Switches are very fragile.
The cable that snapped was my ground.

 

[carlinb17]

poor ground connection could certainly cause issues, if you think the cables are not making adequate contact or connection I would definitely re wire them.