SOLVED General Tso's with pedalpcb 3pdt pcb wiring

[NickC]

hi guys, it's been a long time since i built a pedal, (maybe because i'm finding the balance with my sound? i don't think so ehhe). In a hurry to finish, I mounted the pcb on the switch, only to notice that in this case the connection is different. do i have to change the switch or can i adapt it? Thanks in advance

 

[Laundryroom David]

I’d just wire up a switch. Easier than trying to use that board, I think.

https://docs.pedalpcb.com/project/GeneralTso.pdf

 

[NickC]

But if i wire it in the classic way and not use the mute and buffer hole on the pcb it will bypass the buffer? I prefer a non buffered version

 

[NickC]

ok i have wired it in the classic true bypass way , without using the buffer and mute connections on the pcb, everythings works!

 

[andare]

ok i have wired it in the classic true bypass way , without using the buffer and mute connections on the pcb, everythings works!

Any volume drop without the buffer?
I want to build this one and I also don't care about buffers.

 

[NickC]

Any volume drop without the buffer?
I want to build this one and I also don't care about buffers.

I have already integrated the buffer into the switch loop(moen gec8 live) on my pedalboard, so I don't have problems with pedals in true bypass, in fact, when I can , I try not to put additional pedals with buffers. The general tso works perfectly, when active it does not lose volume, on the contrary it gains volume based on the settings.