SOLVED Harmonic percolator help

[RexSkeleton]

Hey all just finished the percolation station build. Not getting any signal. I used a Mp39b for the germanium and 2n3565 for the npn. I did have a ge diode arrive broken so I subbed for a schottky. Any help would be appreciated

 

[jwin615]

It seems both the 404 and risky are EBC PINOUT, so that's not it.
Do you have bypassed signal?

 

[RexSkeleton]

It seems both the 404 and risky are EBC PINOUT, so that's not it.
Do you have bypassed signal?

I have no signal

 

[jwin615]

Double check your jack wiring
If that's correct you need to check continuity on your switch poles

 

[RexSkeleton]

Double check your jack wiring
If that's correct you need to check continuity on your switch poles

Thanks that solved it. I was using TRS jacks that I had around and had simply wired to the wrong pin. Thank you!

 

[GizzWizzKing]

Have you tested your foot switch? It looks like the top middle lug is angled which could mean it got too long with the iron and the switch may have given up the ghost.

Edit: I was a day late and a dollar short. Glad it's fixed!

 

[jwin615]

Cool. I couldn't recall which was which off the top of my head but it felt off.
Please mark it as solved.