125B Help with OCTAVIUS

[Travis]

Some help with tayda drill template and OCTAVIUS

https://pcbguitarmania.com/wp-content/uploads/2020/12/Octavius-Building-Docs.pdf

 

[Travis]

https://pcbguitarmania.com/wp-content/uploads/2020/12/Octavius-Drilling-template.pdf

 

[finebyfine]

I'm leaving work too soon to fire up Illustrator for more exact measurements but this should get you there. Done with the measure tool in Adobe Acrobat Pro - not sure if the free version has the tool or not.

 

[Robert]

I would be very cautious with the PCBGM template...

It looks like it would be very easy for the 1/4" jacks to interfere with the components on the main PCB. The knobs are set way too high in the enclosure for my comfort.

 

[Travis]

Some help how? Are you asking someone to do it for you?

a.) Take that file and open it in a graphic design software. You'll need to size it to be a match for the 125B. Then just take measurments from the center to all the hole locations.

or

b.) Print it out and measure the distances.

I do not understand why you are so blunt, I simply ask for help since I do not know how to get the coordinates

 

[Travis]

I'm leaving work too soon to fire up Illustrator for more exact measurements but this should get you there. Done with the measure tool in Adobe Acrobat Pro - not sure if the free version has the tool or not.

View attachment 27491

Thanks bro, now I understand it

 

[Travis]

I would be very cautious with the PCBGM template...

It looks like it would be very easy for the 1/4" jacks to interfere with the components on the main PCB. The knobs are set way too high in the enclosure for my comfort.

I'll be careful! thanks!!