Dan0h
Well-known member
The sounds this thing does, I mean it’s close to a lot of things but it has that something you can’t really put a finger on.
Mouser for IC’s, LMS for the knobs, 1n34as from Stompboxparts, and the rest from Tayda. Sounds amazing as most of you already know. I got the “mini” PCB because originally I was going to rock it in a 125b. But the more I thought about it the more I wanted to stay true to the inspiration. So I used a 1590bb. I didn’t have the enclosure ready to go when I finished the board so I tested it pre-boxing. Fired right up.
Mouser for IC’s, LMS for the knobs, 1n34as from Stompboxparts, and the rest from Tayda. Sounds amazing as most of you already know. I got the “mini” PCB because originally I was going to rock it in a 125b. But the more I thought about it the more I wanted to stay true to the inspiration. So I used a 1590bb. I didn’t have the enclosure ready to go when I finished the board so I tested it pre-boxing. Fired right up.