Leprechaun pots layout

[ANGRY_SWEDE]

I am in the process of designing artwork for my Leprechaun build and I have noticed many other diy-er's seeming to label their Leprechauns "incorrectly." Are y'all going off of the Rainbow Machine layout, or am I missing something? The "regeneration/magic" control looks to be getting labeled as the (from the exterior of the enclosure) bottom left pot, whereas the PedalPCB ver is located as the bottom center control. Please correct me if I am wrong but the PedalPCB layout should be (left to right, top to bottom)... first, spectrum, second, color regeneration, dispersion?

I just wanted to double-check before I started printing.

Thank you!

 

[p_wats]

You know what? I think you're right. I just checked mine, and the center bottom knob has a far greater effect on the Magic setting than the left bottom knob.

I think I never bothered to question it before as the color knob is more pronounced when magic is on too (more repeats available to affect the tone of, I guess).

 

[ANGRY_SWEDE]

You know what? I think you're right. I just checked mine, and the center bottom knob has a far greater effect on the Magic setting than the left bottom knob.

I think I never bothered to question it before as the color knob is more pronounced when magic is on too (more repeats available to affect the tone of, I guess).

ok, cool. I wasn't positive if it was a text error on the pcb or not.

 

[Cucurbitam0schata]

Thanks @ANGRY_SWEDE and @p_wats for starting the convo here. I'd love to hear some other folks weigh in, very interested since I'm about to finish up design plans for my two rainbow machines.

 

[p_wats]

Thanks @ANGRY_SWEDE and @p_wats for starting the convo here. I'd love to hear some other folks weigh in, very interested since I'm about to finish up design plans for my two rainbow machines.

I'd follow the build docs/product page. The fact that both the center knob and extra footswitch are labelled "regeneration" should solidify that as the equivalent to the "magic" control (even though that means mine is labelled wrong).

 

[zgrav]

equivalent circuits do not alway result in the pots being in the same positions as the originals. if in doubt, follow the build documents and the pcb.