Minnow bypass LED always on (SOLVED)

[Fishbonetabby]

First time in a long time here! This is such a cool pedal and has basically replaced the duck box on my board for now. I got one strange problem though and that is while the pedal is switched off the bypass LED remains on but dim. Everything else works great. Any reasonable explanation for this? I’ll be yanking it out of the housing again to remove the sockets I had in place while I waited for the right parts so fixing it shouldn’t be a problem if it’s something I did wrong. Thanks!

 

[Robert]

It looks like you might have the GND and SW wires swapped.

 

[Fishbonetabby]

It looks like you might have the GND and SW wires swapped.

BINGO! Thank you! To me it seemed like such a peculiar problem esp since the pedal works perfectly so I figured it was worth asking before digging around. I appreciate you.