New project stuff maybe?

I have the luxury of a milling machine in the shop (manual, not CNC). If I had this problem to solve, I think instead of counterboring individual holes, I might just flip the box on it's face and mill the whole inside surface down to standard thickness.
 
Erik S said:
I have the luxury of a milling machine in the shop (manual, not CNC). If I had this problem to solve, I think instead of counterboring individual holes, I might just flip the box on it's face and mill the whole inside surface down to standard thickness.
Click to expand...
On a CNC if I'm milling a whole enclosure it's an extra 30 seconds of work to program in counterbores with the same center point as the holes and maybe an extra couple minutes of milling, I would be more likely to go the counterbore route.

All this is currently moot for me as I don't yet have a jig big enough to hold a 1590DD, so that would probably be the precursor to solving this problem.
 
Revised boards are 64% finished in fabrication, which is a little frustrating because everything else is finished and now the Uberschall is holding everything else up :confused: I'm not surprised, this is what they said would happen, I'm just impatient.
 
vigilante398 said:
Not really a problem assuming you have a drill with a collet big enough to handle 12mm.

If you look at the dimensions of the bits @Paradox916 posted though the M6 one has an 11mm blade diameter and the M8 has a 14mm blade diameter. Those would certainly do the trick.

I misplaced my calipers so I still haven't measured the walls of this enclosure I have on hand. Next week I'll be less stressed and have more free time, I'll try to get stuff done. My band's EP just dropped today and we're playing a release party tomorrow, so naturally my guitarist's rig died. The venue has a backline amp so he can use that, but he uses a Victory V4 preamp for most of his tones and it's on the fritz right now, so I'm building him a Black Eye to use in its place.

So if you're in the Chicago area (*cough* @jhaneyzz and @Gordo *cough*) I'm going to be playing Montrose Saloon in Chicago saturday night, doors at 6:30, first band at 7:00, we go on at 9:00.
Click to expand...

I'll check my schedule and see if I can make Saturday work downtown. If Gordo hasn't had his fill of my company from our Guitar Geekfest & Talent Barter he might be interested as well.

And FYI...

I literally have my Black Eye right here on my board and I'm like 3 miles from you, so there is that option..

IMG_0115.jpg
 
jhaneyzz said:
I'll check my schedule and see if I can make Saturday work downtown. If Gordo hasn't had his fill of my company from our Guitar Geekfest & Talent Barter he might be interested as well.
Click to expand...
Too late, it was last Saturday :P We are playing again this Thursday at the unsigned artist showcase at Artifact Events downtown, but traffic around there is always garbage so I wouldn't fault you for not coming.

379467345_1196959597909657_2335735142654412615_n.jpg
 
jhaneyzz said:
I'll check my schedule and see if I can make Saturday work downtown. If Gordo hasn't had his fill of my company from our Guitar Geekfest & Talent Barter he might be interested as well.

And FYI...

I literally have my Black Eye right here on my board and I'm like 3 miles from you, so there is that option..

View attachment 56724
Click to expand...
Where did you get the washer for the footswitch on the blackeye? those are sick
 
drgonzo1969 said:
Where did you get the washer for the footswitch on the blackeye? those are sick
Click to expand...
They're called Serrated Washers. I use 12mm Stainless version. They're a little large for the shaft of the switch so I put a wrap of solder wire as a bushing to kinda keep it centered.


www.ebay.com

M2.5-M16 DIN9250 Stainless Steel Disc Spring Serrated Lock Washer Elastic Gasket | eBay

Find many great new & used options and get the best deals for M2.5-M16 DIN9250 Stainless Steel Disc Spring Serrated Lock Washer Elastic Gasket at the best online prices at eBay! Free shipping for many products!
www.ebay.com
 
You must log in or register to reply here.
Back
Top