New project stuff maybe?

Well these are for you guys, not me. I draw mine up in CorelDraw, but I can export similar vector outputs as the rest so I can make .svg or vector .pdf available to anyone that wants to go that route.
 
temol said:
Any issues on full volume/gain?
Click to expand...
Sorry, missed this comment earlier. No issues with full gain unless I'm too close to the amp. It has typical high-gain noise, but no oscillations or power noise. Haven't tried it full volume yet because it's loud, but I'll give it a shot. Also I'll be getting my real guitar back on Friday so I can try it out with something that isn't just a piece of plastic with cheap pickups in it.
 
vigilante398 said:
Well someone else can draw up a Tayda drill template like that, I'm done o_O Slots with rounded ends take forever to draw up in there, so unless they add an "upload .dxf" option I'm not changing the template I made :p
Click to expand...
Stick to your guns, I have no issue with them on an Angle.
From first hand experience Drilling & Filing one slot at a time is a huge PITA!!!, Times 4 Forget it!!!
What brand & size of enclosure will you have settle on?
 
music6000 said:
Stick to your guns, I have no issue with them on an Angle.
From first hand experience Drilling & Filing one slot at a time is a huge PITA!!!, Times 4 Forget it!!!
Click to expand...
Oh that reminds me though, the Tayda enclosure's walls are too thick for this, I couldn't get the nuts to thread until I took off the washers. I may have to source enclosures from somewhere else and mill them like I do for the other projects. Amplifyfun may be an option for those that want custom stuffs, not sure where they get their enclosures.
 
vigilante398 said:
As promised, quick and dirty demo. It's just phone audio so nothing incredible, but you get the gist of it. I couldn't find my switched jacks for the FX send, so I just used regular jacks and jumpered FX send and return, that's why there's a jumper hanging out in back,

Click to expand...
omgggggggg. heck yes.


only noticed a mild bit of feedback when holding the guitar 'mute' for a second - but it sounded like the type that's completely normal for a high gain amp..

i often see people complaining about high gain preamps oscillating or whatever, but it's hard to tell if what they were reporting was normal feedback oscillation that you would get from any other high gain amp with the volume up (like a peavey 6505 for example), or if it's an inherent self-oscillation in the preamp..

i wonder if the same people realize that you're supposed to use a noise gate in your rig when you're pumping this much gain (and/or volume).

boss NS-2 works a treat for this. had one a long time ago, but then i grabbed one of these second-hand and never looked back
1693449250432.png
 
Last edited:
vigilante398 said:
Haven't tried it full volume yet because it's loud, but I'll give it a shot. Also I'll be getting my real guitar back on Friday so I can try it out with something that isn't just a piece of plastic with cheap pickups in it.
Click to expand...
Headphones amp or audio interface is all you need. It's even better to eliminate the amplifier (this kind of feedback is acceptable). Set all knobs to the max and listen ;)
 
vigilante398 said:
Oh that reminds me though, the Tayda enclosure's walls are too thick for this, I couldn't get the nuts to thread until I took off the washers. I may have to source enclosures from somewhere else and mill them like I do for the other projects. Amplifyfun may be an option for those that want custom stuffs, not sure where they get their enclosures.
Click to expand...
Just fired up the Mockup:
Supersonic Mockup Pedal 2.jpg
 
szukalski said:
I love that it has two channels and a FX loop! What kind of madness is this!?!
Click to expand...
Over-the-top unnecessary madness.

steviejr92 said:
Umm so when did you say this will be available? :)
Click to expand...
Not sure yet, it will need to be revised. I've let Jeff know, I think he's waiting on me to give him a revised board outline so he knows what to move. I'll try to get it onto my to-do list soon, but the list is never empty. I have a 4-day weekend coming up here though, so that's something.
 
vigilante398 said:
Over-the-top unnecessary madness.


Not sure yet, it will need to be revised. I've let Jeff know, I think he's waiting on me to give him a revised board outline so he knows what to move. I'll try to get it onto my to-do list soon, but the list is never empty. I have a 4-day weekend coming up here though, so that's something.
Click to expand...
Looking forward to the next update! Will be reserving mine when they are available!
 
steviejr92 said:
Looking forward to the next update! Will be reserving mine when they are available!
Click to expand...
I just shot Jeff a message since I've been working from home this week and can't harass him in person. He says he's down to make the adjustments and they probably won't take long. It's really just take out a notch on the bottom for the middle screw hole and move the MOSFET somewhere so it has room to lay down more, and that should be it. I should be able to get the info to him tonight and he'll try to get it done in the next day or two. I will keep everyone posted, partially because you asked me to but mostly because I don't have any hobbies besides this so I spend too much time on forums.
 
You must log in or register to reply here.
Back
Top