Plastic enclosures?

[drgonzo1969]

Has anyone seen clear plastic enclosures? I feel like I saw some somewhere but haven’t been able to find them recently. I have some ideas for clear enclosures for some of the circuits with sexy pcbs. Thanks

 

[Erik S]

Nope. I'll take any opportunity to link this though.

DEMO - Tagboard CE-2 chorus

most sensible builders out there are putting time into designing takes/original circuits and PCB layouts on diptrace or similar, for efficient and reliable PCB/pedal production, and meanwhile here’s me regressing into veroboard and tagboard builds like a silly goose. after doing a few tagboard...

forum.pedalpcb.com

 

[DailyDovetails]

https://robertkeeley.com/product/andy-timmons-halo-light-bending-edition/ same idea as the one above. A 3d printed one would be kind of opaque. There may be some sort of micro computer raspberry pi ect case that would work.

 

[Barry]

Didn't @Chuck D. Bones build a Covid Fuzz in a clear case?

 

[Mentaltossflycoon]

My first ppcb project was a quarantine fuzz that I put in a clear plastic hammond.

Hammond Manufacturing 1591BTCL 1591B CLEAR POLYCARBONATE https://a.co/d/3GwjhgU

 

[drgonzo1969]

My first ppcb project was a quarantine fuzz that I put in a clear plastic hammond.

Hammond Manufacturing 1591BTCL 1591B CLEAR POLYCARBONATE https://a.co/d/3GwjhgU

There we go! Nice! Hell ya. Thanks dudes

 

[Barry]

My first ppcb project was a quarantine fuzz that I put in a clear plastic hammond.

Hammond Manufacturing 1591BTCL 1591B CLEAR POLYCARBONATE https://a.co/d/3GwjhgU

I knew that somebody did!

 

[owlexifry]

https://robertkeeley.com/product/andy-timmons-halo-light-bending-edition/ same idea as the one above. A 3d printed one would be kind of opaque. There may be some sort of micro computer raspberry pi ect case that would work.

omg this is fucken awesome.

My first ppcb project was a quarantine fuzz that I put in a clear plastic hammond.

Hammond Manufacturing 1591BTCL 1591B CLEAR POLYCARBONATE https://a.co/d/3GwjhgU

polycarbonate? damn, that's no ordinary plastic.
has it cracked yet?
i reckon i might be keen to get on a couple of these too..

 

[Mentaltossflycoon]

omg this is fucken awesome.


polycarbonate? damn, that's no ordinary plastic.
has it cracked yet?
i reckon i might be keen to get on a couple of these too..

It's only seen light use but it's held up fine so far.

 

[darwin999]

Very cool! But be careful - without the shielding provided by a conducting metal enclosure, you may need a little extra effort to avoid problems from RF pickup. E.g., good ground planes, twisted pair wiring, extra capacitors in feedback loops to ensure rolloff at high frequencies (beyond audio), and/or use of ferrite beads.