REQUEST PPCB Minnow...

Coda

Coda

Well-known member
Does anyone have a layout for the Minnow? It's a 6-hole layout, but it features two LED's...
 
Coda said:
Not for the Tayda Drill Service…

I could use the pre-drill 6-hole, but the LED’s would be off. However, could I not use a bi-color, center negative LED?…
Click to expand...

I don't see why not, or just use the rate LED as the indicator for both by using the anode from the rate and cathode from the bypass if you don't mind the rate not being blinky blinky in bypass. I'm going to try the bi-color LED set up for rate on my next modulation build, but thats a month or two out at this point, i'd be very interested to know how it works out for you if you try it.
 
swyse said:
I don't see why not, or just use the rate LED as the indicator for both by using the anode from the rate and cathode from the bypass if you don't mind the rate not being blinky blinky in bypass. I'm going to try the bi-color LED set up for rate on my next modulation build, but thats a month or two out at this point, i'd be very interested to know how it works out for you if you try it.
Click to expand...

I think I’m gonna give it a try. I’ll report back…
 
FormulaFourteen said:
Bumping this because I also want to build a. Minnow.

@Coda did you ever generate a Tayda template?
Click to expand...
I did not. As I mentioned earlier in the thread, I used a pre-drill PPCB 6-hole enclosure from Tayda and used a bi-color LED. You could use the same and eyeball the bypass LED, I suppose...
 
You must log in or register to reply here.

Similar threads

MichaelW
Need help with a fish......
2
Replies
22
Views
864
HamishR
H
J
REQUEST Octarock drill layout??
Replies
3
Views
129
Audandash
Audandash
Audandash
125B Ppcb 3 knob with switches template
Replies
0
Views
72
Audandash
Audandash
joelorigo
Drilling Questions
Replies
6
Views
227
joelorigo
joelorigo
F
125B SOLVED Pedalpcb - Pipe Stretcher
Replies
4
Views
728
FormulaFourteen
F
Back
Top