Reeves Zo Wiring

[Discobungle]

Hey there. I was wondering if someone could me out with the off board wiring for this strip board version of the Reeves Zo. I have it all built and I get bypass signal, but something is up with my wiring to the 3PDT/input output jacks. I’m using the attached wiring diagram. But I was a bit confused with the “swell 2 to output”. Does that mean swell two should attach to the output jack or to the 3PDT or both. Thanks for the help.

 

[Discobungle]

Here’s the wiring diagram.

 

[darwin999]

It means that Pin 2 of the Swell potentiometer should be connected (via a wire) to the 'pin' contact of the Output connector.
So that 'Swell' pot is just a Volume pot w/ a fancier name.

 

[jwin615]

It means that Pin 2 of the Swell potentiometer should be connected (via a wire) to the 'pin' contact of the Output connector.
So that 'Swell' pot is just a Volume pot w/ a fancier name.

Ain't that swell