SOLVED Sanguine Distortion Indicator LED

[Mattallica75]

I believe I have followed the assembly instructions well and the pedal works just fine, however the indicator LED will not come on.
I have tried multiple LEDs and multiple CLRs. Any help would be greatly appreciated.

 

[BuddytheReow]

Is it in backwards? Sorry for the dumb question. I would also check if you have continuity to ground on the LED when engaged. If you don’t that means you’ve got a cold joint going to the stomp switch

 

[jimilee]

The K is for the cathode (Kathod?) which is where the flat side of the LED goes. This particular picture looks like you need to solder it in. You can test your LED with your DMM. Put it in diode mode and touch the black probe to the cathode and the red one to the other side. Also, if you have the input ground wire on the wrong ground lug, you’ll need it on the right one.