What are you getting? I am going for Vong Filterung and Pumpernickel.
Well, I'll trace the Pumpernickel and then we'll have a schematic for future use. Just in case.Just the vong lpf, I'm pretty happy with my thumbsucker so I'm off compressors for now.
Well, I'll trace the Pumpernickel and then we'll have a schematic for future use. Just in case.
I'd more than likely get down if you did.Already have a schematic, although I'd be interested to see if you come up with something different. (It's not my trace)
Looks like these are being discontinued so it might be worthwhile to look into working up a PCB since we have the 4301 module.
Yep, the Gumas are the B3K and VMT. The NE_04 is the Nathan East preamp. The Growling Krizzly is the Gallien Kreuger 400RB preamp (schematic is on the Schalltechnik website) Otherwise, I think they are original.I assume the Guma Overdrives are Darkglass inspired...
Are the others based on anything else, or are they original designs?
I can send you the Pumpernickel and Vong Filterung PCBs when they arrive, if needed. The LPF and HPF mini Vongs should be just a subsets of the big one.I was considering grabbing them all, except I only need them "briefly" and I have no use for the kits...![]()
I'm with you on that question, I've never had strong feelings about any gk products that I've used. Got the job done and nothing more. I saw those a while back and assumed there must be an artist association there.So whats the secret sauce with the 400RB y'all?it's the only bass amp I've ever owned and I always thought it was like "fine." It's not that loud and like doesn't sound like it can punch god or something afaik. I'm always surprised to hear that people like them or seek em out. Is there like a magic setting that's the shit or something? I'm not a "real bass player" fwiw I guess
I see they are in "short supply", so good luck.I’ve been wanting a pumpernickel compressor for quite a while now!
The 400RB and 800RB are supposed to have a specific "growl" when the preamp hits the "rails". Basically it breaks up in a special way when the power amp gets pushed by the post-preamp boost circuit. Overall, I think GK has a small following but it is an acquired taste.I'm with you on that question, I've never had strong feelings about any gk products that I've used. Got the job done and nothing more. I saw those a while back and assumed there must be an artist association there.