KR Sound
Well-known member
I’m game!
What's in the mailbox? 📬 📦
- Thread starter Harry Klippton
- Start date
jimilee
Well-known member
Oh it’s on now!
peccary
Well-known member
Got this in the mail today. My M-35 has some deeper issues that I need to figure out (made much more difficult from the lack of schematics).
I got this for a pretty good price. My plan is to use the four busses to feed the ADAT's eight ins and channels 9-16 to mix what comes out of the ADAT, and use the main L/R busses to send to my computer.
I should be able to get it set up and tested tonight. We'll see how that goes.
I got this for a pretty good price. My plan is to use the four busses to feed the ADAT's eight ins and channels 9-16 to mix what comes out of the ADAT, and use the main L/R busses to send to my computer.
I should be able to get it set up and tested tonight. We'll see how that goes.
Harry Klippton
Not Interested
Ol' 3-mixer Joe
peccary
Well-known member
The A&H mixer is pretty sweet, and is what I'm going to use to mixdown to my PC since it has USB. So there's definitely going to be some mixer-on-mixer action
I like to take the long, stupid way around things, apparently.
Just be careful running it in split mode. One wrong buss assignment and you'll need new monitors/ears.
Locrian99
Well-known member
Closing up a tayda enclosure, instead of not being able to get the screw to go in due to powder coating i had the opposite problem….
I don’t think ive ever seen that before. Apparently i have no idea how screws are made. I assumed the threads were cut into it. Well this os smaller than the screw would be with threads…. Also this last batch of enclosures. Havent had one yet that i had to use the tap on.
I don’t think ive ever seen that before. Apparently i have no idea how screws are made. I assumed the threads were cut into it. Well this os smaller than the screw would be with threads…. Also this last batch of enclosures. Havent had one yet that i had to use the tap on.
Harry Klippton
Not Interested
Fama
Well-known member
The newest batch of enclosures came from Tayda, thanks to @jessenator's tutorial somewhere else on the forums they came out brighter than the previous batch. I messed around a little with the filters and brightness/contrast to make them look more like they look to the naked eye with poor indoor lighting - the camera is more flattering by itself, and they look great in sunlight. The upper right is the old Fuzzmaster which came out too dark to really read, the new one is a clear improvement even though I forgot the white border and the candy metal purple was darker than I thought.
The enclosure with the error message about not passing QC was the orange Organ Donor box, and I can't see any flaws in it. There was a fingerprint so the best guess I have is that there was a smudge they thought was a flaw, but was cleaned easily? Either that or...
...it might have been actually about the Drömtid enclosure (metallic candy red) which has a clear blemish on it, although it's on one of the sides so I don't really care about it that much. But it is definitely a clear blemish, no way around it.
drgonzo1969
Well-known member
Mentaltossflycoon
Well-known member
Thanks @cwsquared !
pbrommer
Well-known member
Butter Roll Vibe
I've got one of these coming - found a decent deal at reverb. My wife said order it for Father's Day. I know I built Dan Schumacher's Spiralizer, but this one has my curiosity as to what's inside. Plus it doesn't sound too bad. And more vibe is good!
I've got one of these coming - found a decent deal at reverb. My wife said order it for Father's Day. I know I built Dan Schumacher's Spiralizer, but this one has my curiosity as to what's inside. Plus it doesn't sound too bad. And more vibe is good!
giovanni
Well-known member
I’d buy that just for the graphics!
