Black Friday 20-23

[Alan W]

So—is there no "pedal building" Black Friday sale thread up yet? Seems odd, unless there was some sort of decision not to be good consumers this year... Hmmm.

I'll get it started then, with one of my favorite suppliers:.

https://www.tubesandmore.com/?utm_s...ail&utm_term=0_0cd0c8c92f-c68b87081b-39227136

 

[Robert]

It's not Black Friday yet, I'm sure those emails will start pouring in any minute.

 

[benny_profane]

SBE has 15% off through Thursday November 23. Use code NOVSALE23 at checkout.

 

[Erik S]

Edit: - Oops. @benny_profane was quicker on the trigger.

 

[Synchrony Pedalworks]

Amplified Parts is 10-20%
Code: BKFRI23

 

[Paradox916]

Tayda has a 20% coupon !

 

[mkstewartesq]

Tayda has a 20% coupon !

That’s just mean.

 

[Paradox916]

That’s just mean.

It’s 20% off if you buy in bulk that can be pretty significant.

 

[Alan W]

not directly pedal building related, but I'm on the mailing list:

Neil Young - Official Webstore

The official Store for Neil Young! Get the latest merch, music, t-shirts, hoodies and accessories

neilyoung.warnerrecords.com

 

[jimilee]

Tayda has a 20% coupon !

You’re a monster.

 

[Dan M]

I clicked it, even after you guys called @Paradox916 a mean monster. I guess I’ll click on anything.

 

[PunchySunshine]

I clicked it, even after you guys called @Paradox916 a mean monster. I guess I’ll click on anything.

I'm still fighting the urge to click it!....press the shiny, red button....

 

[Fizz]

Recommend me some great PedalPCB pedals to hot rod my Marshall 80s style for the coming BF sale.

 

[owlexifry]

Recommend me some great PedalPCB pedals to hot rod my Marshall 80s style for the coming BF sale.

which marshall are you running?

 

[jwin615]

Recommend me some great PedalPCB pedals to hot rod my Marshall 80s style for the coming BF sale.

Revel overdrive

 

[Fizz]

which marshall are you running?

2204

 

[Fizz]

Revel overdrive

That's actually a little to heavy for me and too modern for 80s metal IMO.

 

[owlexifry]

2204

ooof. good choice \m/

pretty much any TS or BB based drive is going to make it sing. klon goes alright too

Frost Drive - PedalPCB.com

Compare to VFE Ice Scream

www.pedalpcb.com

Extreme Scream Machine - PedalPCB.com

Compare to Maxon Overdrive Extreme OD808X

www.pedalpcb.com

Mean Green Metal Machine - PedalPCB.com

Compare to Fortin Modded TS808 Tube Screamer

www.pedalpcb.com

Kliché Overdrive - PedalPCB.com

Compare to Klon Centaur

www.pedalpcb.com

but who could forget:

UberDrive - PedalPCB.com

Compare to Boss SD-1

www.pedalpcb.com

 

[cdwillis]

I have a regular LGSM board I tweaked that sounds pretty good with my Marshall. I doubled up the diodes from one set of 1n4148s to 2 on each side, then I changed the 4.7k/47nf/51k in the drive section to 2.2k/100nf/22k. It is sounds basically the same at minimum gain, but it has about twice the output. The amount of drive is about the same if you crank it if you're into that too. And I change the 51pf cap to a 100pf to help with noise a little since it's gainier.

 

[jwin615]

That's actually a little to heavy for me and too modern for 80s metal IMO.

I mean, it depends on what style 80s metal...
It would rip on Painkiller.
But honestly, it's a really good amp pusher/tone shaper/tightener.
6ou don't have to dial it all the way up.