Missing Build Docs / Schematics

[Lytt Effects]

Hey @Robert, any updates on the builds docs for the Pro-10 Dual and the latest iteration of the ADHD?

 

[VanWhy]

I'm working on the doc for both of these today.

Bump. Curious, any update on this?

 

[Billyhank]

Could I get a BOM for the Speaker Motivator? Just want to make sure I have the right pots and transistor on hand.

 

[Robert]

Could I get a BOM for the Speaker Motivator? Just want to make sure I have the right pots and transistor on hand.

Speaker Motivator

https://www.pedalpcb.com/product/pcb670/

forum.pedalpcb.com

 

[Billyhank]

Speaker Motivator

https://www.pedalpcb.com/product/pcb670/

forum.pedalpcb.com

Thank you sir!

 

[dividedzero]

I'll get it posted ASAP. Is there anything specific you need to get you started?

what 24LC32A is compatible. I have 2 custom ones (both with 8 effects) I have had made and and extra specialist because I apparently can't read right. Any of those work? I have blanks and a programmer too. Right now it's the only thing missing to make it work

 

[Robert]

They'll work but the algorithms loaded on them are mono.

 

[pingpongcomputer]

I deleted the guesswork drill guide I made for the Muffinator. I made everything fit, but several of my "measurements" were off. Figured it was better to take down the post and not lead others astray.

 

[Robert]

I deleted the guesswork drill guide I made for the Muffinator. I made everything fit, but several of my "measurements" were off. Figured it was better to take down the post and not lead others astray.

Your template looked correct to me.

Keep in mind the LED almost never aligns with the pads on the PCB with the projects here. That would require either some really wonky LED placement, or severely oversized PCBs just for the sake of LED alignment.

It also allows for the use of the big bulky metal LED bezels that would otherwise short against the back of the PCB.

https://docs.pedalpcb.com/project/drill/125B-Muffinator.pdf

 

[mralanmorgan]

Your template looked correct to me.

Keep in mind the LED almost never aligns with the pads on the PCB with the projects here. That would require either some really wonky LED placement, or severely oversized PCBs just for the sake of LED alignment.

It also allows for the use of the big bulky metal LED bezels that would otherwise short against the back of the PCB.

https://docs.pedalpcb.com/project/drill/125B-Muffinator.pdf

Is this a good template for the Muffinator then?

 

[mralanmorgan]

Is this a good template for the Muffinator then?

It looked good so I used it. It worked perfectly. I usually have a hard time with toggle switches lining up right, but this was spot on.

 

[Robert]

Is this a good template for the Muffinator then?

Sorry, just saw this.

Yep, that's the one, but you know that by now.

 

[mralanmorgan]

Sorry, just saw this.

Yep, that's the one, but you know that by now.

No worries! It came together nicely. Do you have any recommendations for different diodes?

 

[Billyhank]

Could I get the drill template (or equivalent) for the Stagecoach? Would the Pandora’s box work for it?

 

[zeropluszero]

Lycan Overdrive build docs?

 

[temol]

Any chance for the Sandblaster Fuzz schematic?

bump...

Scabbard Overdrive would be nice too

 

[zeropluszero]

Lycan Overdrive build docs?

I'd settle for a yes / no I can buy all its parts from tayda

 

[zeropluszero]

bump...

Scabbard Overdrive would be nice too

SCABBARD
---------------------
4 100R
1 1K
2 2K2
1 4K7
3 10K
1 20K
3 47K
3 1M

3 1n
1 3n3
2 10n
3 47n

3 1u MLCC
* Filtering/decoupling, use MLCC

11uF E
4 4u7
2 100u

2 D9B
1 5817

4 A100K

2 OP07

1 8.2uH
* https://www.taydaelectronics.com/8-2uh-inductor-ec24.html

1 ON/ON

I have the drill coordinates for tayda if you want them.

 

[Robert]

I'd settle for a yes / no I can buy all its parts from tayda

I'm pretty sure you can.

Lycan Overdrive

https://www.pedalpcb.com/product/pcb509/

forum.pedalpcb.com

 

[Robert]

Sandblaster fuzz schematic would be awesome if possible please

Knock, knock...
Any chance for the Sandblaster Fuzz schematic?

https://docs.pedalpcb.com/project/SandblasterFuzz-PedalPCB.pdf