Missing Build Docs / Schematics

Foxbat said:
Hello any update on the Sproing Deluxe reverb BD? Thanks
Click to expand...
I'd love to see this as well. I can see the BOM, but don't know where each resistor / capacitor is supposed to go. I've seen other threads that say "swap R8 with a 10K for more reverb", but I don't know what the current value of R8 should be when buying components.
 
GuitarZero said:
I'd love to see this as well. I can see the BOM, but don't know where each resistor / capacitor is supposed to go. I've seen other threads that say "swap R8 with a 10K for more reverb", but I don't know what the current value of R8 should be when buying components.
Click to expand...
I just checked my Sproing Deluxe PCB and R8 is 10k; I do not have the regular Sproing PCB, so I can't say what R8 is for that one.
Between the pic below and board-in-hand with values silkscreened on, you're good to go.
SproingDeluxe-Panel.jpg

Sproing.jpg
 
I believe it's R8- 39K on the Sproing, 10K on the Deluxe!
The lower you go, The more spacial it gets!
I settled on 25K on my Sproing & it sounds Great!
You could use a Trimit PCB with a 50k Trimmer & you can set where you want
 
@Robert, hey bud, just wanted to take a second to thank you for dropping Docs with your new PCB releases recently. I know all of us absolutely LOVE that the parts are silkscreened on the boards, but it's always so nice to scope the schematic.

Hope you have a wonderful rest of your weekend.

My backlog of your PCBs alone is 27..........and always counting of course.
 
You must log in or register to reply here.

Similar threads

VanWhy
Distortion 250 schematic noob questions
Replies
6
Views
194
jwin615
J
jwyles90
DEMO Lectric-FX Polychorus
Replies
12
Views
1K
Moltenmetalburn
M
DGWVI
DEMO super duper UberFuzz
Replies
15
Views
855
DGWVI
DGWVI
joelorigo
Reuse Finished Enclosure
Replies
8
Views
507
HamishR
H
temporalhaze
Revel Overdrive - Mid Boost/Cut Mod?
Replies
10
Views
1K
falkry05
F
Back
Top