Search results

So im wondering how to get different ground routes in diptrace. I see there is a common ground attached to the ground plane, but there is also another ground that is attached to the ground at some point but dosent clip to the ground pour. Can anyone help me out? Ive made a couple of pcbs so far...

hey y'all. so i want to build a stripped down octave pedal using only the octave 1 of the ocelot and the direct signal. how much from the schematic can i effectively remove to eliminate part count for a new pcb?

So one is not powering atall.. The other im getting a saggy power distorted bloomy sound. Hardly any modulation but i cant hear it proplerly anyway. Ive tried biasing the .. bias. And the gate but something isnt right. This top one has the saggy distorted sound. Not much else. This bottom...

hello yall. im making this and im finding it a wee bit tricky to get a 25k bias trimpot. on the bf2 scheme it uses a 22k bias trimpot. am i gonna get away wirth either a 20k or 50 trimpot? i could proberly make a psuedo 25k trimpot with a 50k resistor along the legs (1-3) what do y'all reckon?

i can hear a slight pulsing in the bypass signal with either a comp before hand or a drive afterwards. anyone else have this issue? is this normall or is it a fault do you think?

Hey y’all. so ive built 2 caesers/julias for myself and a friend and im in the process of testing them. Sound all good in the hood. So i reorganise my signal chain and im finding that after my distortion im actually getting a slight but noticable volume boost. Any thoughts to this or remedies?

Does anyone have any mods for either?

So im making one for a chum and was wondering if anyone else has made one. I cant get a clean amp demo online. Does the boost control have any grittyness to the gain?

So i have 2 VHS’s. One the signal only goes through the chorus and reverb, and the other there is no signal atall. the boxed one has the chorus and reverb signal, the out of box one has nothing. I changed the eeprom around and different tl072’s but no change.

Heres my pg-14

Hello all, so i made a pedal for a chum, but the forbidden mode is insanely gated. Almost unusable. Any tips or trickles? X

Hi guys, any peeps can help me out with wiring the kliché in true bypass? I havent decided if i will atm, but im considering it.

Hi y’all hope you are all well and safe. so i have some blank ic’s for the fv-1 and i do have the fv1 dev board/pedal. How do i load and where do i find programs to load onto it? call me a complete noob when it comes to this.

Hello! Wonderful pcb and effect. Is it possible to mod this for dual footswitches 1 for the main on/off And 1 for a mod for just the fuzz, no oscollation or octave, just pure fuzz, And also when is thr schematic going to be released for this?

So.. looking at the order on the pedal it looks like the boost is in front whereas the actual pedal the boost is after the drive?. I may mod for an order switch but im just writing to clarify..

Anychance of increasing the gain? Any mods to do?

Can i change the 100k gain pot to a 250k pot to make a high gain version?

Hi, just curious to the changes to the derailer as i saw the pcb is new.

Im getting feedback on high gain and high presence/top end settings. Is this normal or should it be reletively noise free. It seems to want to feedback easily. Also. Its bloody loud. Alot of the demos i see seem to be having the volume relatively high 1-2 oclock with ease and i cant get it...

Almost sounds like the demo videos, but just sounds to dark for my liking. Can i increase the treble and top end? Its got a very boomy bottom end too.