Search results

  1. I

    Decadence preamp

    Since there is no scheme uploaded to the site, I need to ask for clarification. Is the "100p" at the bottom of the PCB (just above the LED) correct? The silkscreen has a comically oversized footprint and lead spacing (as do the other 2 "100p") for such a small cap value. Maybe it is supposed to...
  2. I

    Parentheses Fuzz

    Finished this one recently...
  3. I

    PedalPCB Muzzle (classic)

    The 4301 was salvaged from another pedal.
  4. I

    PedalPCB Muzzle (classic)

    Acid-etched enclosure. I separated the single dual LED to have clear indicators per function. Range (sensitivity) switch mounted for external convenience.
  5. I

    PLEASE DELETE

    resolved
  6. I

    MT-2 / Metal Zone clone PCB

    Just finished this demo. PCB should be available in a couple of months or so...
  7. I

    MT-2 / Metal Zone clone PCB

    This is a verification build [DIY MT2] I just did for Nicholas Williams [formally Dunwich Amps]. It should be available through godcityinstruments.com in the near future. The build doc and other small details are being worked out.
  8. I

    Guvernator w one simple mod

    I'll prob stick w the LED as it's going to be the most "open" and loud choice. I just want to see what maybe a mix of LED and Si might sound like. Even different colors too... blue/white etc..
  9. I

    Guvernator w one simple mod

    Just finished this and I'm pleased. I used an audio pot vs the linear for the LEVEL as the BOM stated. I like having that jump right about the 3 o'clock setting. These have a ton of low end. Socket the LEDs to experiment in the future. I have a red and yellow in now. I went with a 1590bb to have...
  10. I

    My Guvernator

    Great looking build! The BOM calls for a 9n6 for C1, what did you use? I was figuring I'd simply go with a 10n.
  11. I

    Sub for 2SC732

    2SC1815 works as a substitute. Appropriate ECB pinout. I used them on a fully refurbished Boss HM-2.
  12. I

    Adding a blend to a Promethium (HM-2)

    It has a dual footprint for the Q's [2n5457] so you can use either SMD or through-hole.
  13. I

    Adding a blend to a Promethium (HM-2)

    I built a stand-alone Mask Audio Electronics MAE blender, and it works 100% with an HM-2 into a dirty channel. Zero high freq squealing. That was my test before dedicating it to a pedal.
  14. I

    Adding a blend to a Promethium (HM-2)

    GuitarPCB BnB is bad for high gain applications, especially if you are running the Promethium into a dirty channel. Mask Audio make a blender that may work. I do know from experience the Pepers Pedals blender works perfect for such an application.
  15. I

    Promethium switchable hard clipping question

    What was omitted from my crude mock-up was the LED that I will be adding to the unpopulated pole, as an indicator. Otherwise absolutely no reason to use a 3pdt.
  16. I

    Promethium switchable hard clipping question

    Thank you for that! That makes sense.
  17. I

    Promethium switchable hard clipping question

    I am wanting to use a 3pdt as a hard-clipping switch between two sets of diodes. Am I correct in thinking the anode pad of D6 would be the "send" and the kathode pad of D7 would be the "return?" Thank you in advance for any suggestions, cheers!
  18. I

    Thermionic Deluxe -build-

    Built this for a friend who gave me a bass guitar. Cool dual OD pedal.
  19. I

    Thermionic Deluxe testing issue...

    You were correct. Both 3pdt wired up is needed to test both channels. Cheers!
  20. I

    Thermionic Deluxe testing issue...

    Yeah, most likely. I was just moving my breakout box over to the second footswitch position to test other circuits. I will give that a try with both switches.
Back
Top