Search results

Putting this here since technically it's a mod. I built the little green scream machine, but didn't have any 2sc1815 so I socketed the transistor holes, insulated the legs and changed the position to match the pinout of the 2sc1815 and used some 2n3904 instead. So my question is this. I've...

Update, playing with it in the dark. This looks cool

It's a film free waterslide decal

I've built the green Russian, triangle and now the bigger muff variant on the muffin fuzz. All three sound great, but this or the green Russian are my favorites. Triangle is good, but not as good for me as the other two. Anyway, I got the glow in the dark enclosure from Tayda, thinking it...

Just realized I don't have any on hand. Almost finished the build. I feel like I have almost every thing but this. Is there a common equivalent I can use here?

This is a way too vague answer, because I got them a while back. Either Love My Switches, Stomp Box Parts or Tayda. Sorry, I can't remember, but definitely one of those 3

First up. Fuzztopus. I used the GuitarPCB Emerald Ring Octave circuit into the PedalPCB Muffin Fuzz (I used the Triangle build from the docs here) Second is Urkel Haze, which is the GuitarPCB One Knob Fuzz (a Colorsound fuzz box type thing) Third, is Snuffy, the PedalPCB Snuffy take on the Zvex...

Thank you. Changed it out and working like a charm now. I appreciate it.

When I built my Kliche mini I just wired directly to the switch. So when I was building the Muffin Fuzz, I had the Kliche board for the footswitch and I used that. However, the LED comes on when the effect is off, so I'm wondering if the 2 boards are wired differently. I don't see build docs or...

This thing grunts. I don't have a bass but I'm sure it would sound great with it. Really does good with humbuckers. Also including a quick vid of how I do my faceplate since I was asked previously. I tried to upload directly, but it said it's too big so I had to put it on YouTube as a short...

As for the label, I use duo tone acrylic and engrave and cut it with my laser

I meant LM308, not 358. But I couldn't go back and correct myself, because unlike my pedal, I'm no snitch!! 😂

First of all, mine ain't a Rat, it's a Snitch!! Holy crap I love the sound of this pedal. I used an Op07 I because I didn't have any of the 358s on hand and my experience has been, you either pay much more or get duds if you go cheap. This IC is readily available and sounds great. If you...

Hi all, just finished the Aft preamp and I used a 2N2222A since I didn't have an Oc139. Hfe was 275. It's super noisy, almost microphonic and seems like there's almost a delay before the sound kicks in. Just a weird vibe. The OC datasheet I looked at had the Hfe about 33. So my dumb fault...

Sorry to bump this old thread, but it kind of answers the question I had (how to build a caverns type pedal). The only other question I have is this. How hard would it be to add a blend knob to this, like the caverns has. If it possible to add on this dual pedal setup? Thanks all

If I want to add a momentary switch to give infinite delay on seabed pcb. I've seen to add one leg to leg 3 of feedback and the other to leg 3 of delay. Is it that simple?

Yeah, I thought of that, but the sound just gets so heavy when I roll back the tone (which increases the volume) that I think there has to be something up with the circuit (likely my error), but I just can't pin it down.

Howdy all, I just finished up the Tweed 59. When engaged there's a bit of a volume drop, UNLESS I turn the tone all the way to the left. Then, it really cuts the high frequencies, but also boosts the volume. I reflowed everything. I have no bridge joints and I'm at a loss as to why this would be...

While it's pretty easy to figure out if you can read a schematic, thought I'd suggest adding labels to pots on boards where all pots are the same value. Not everyone reads schematics, so for labeling purposes, it could help them (off the top of my head I'm thinking things like the Byrdhouse...