Aion Flare LED

[Discobungle]

Just finished this amazing pedal and the LED is not working. I’ve switched out the LED, also changes out the LED resistor. Still nothing. Any ideas? Could I have fried the board with over heating the LED points?

 

[szukalski]

What’s the voltage at the LED anode (+) ?

Start there and trace it back

 

[comradehoser]

Orientation of cathode/anode of the LED is the most immediate and logical likely culprit, as the [edit: 3pdt] wiring is baked into the Aion boards.

 

[Feral Feline]

LEDs are not infallible.

Dud or fried, either way = dead.

EDIT: Ahh missed you'd switched out the LED. Well, if there's a short and current is getting past the CLR = 2 dead LEDs and every other LED after that until the short is sorted.

 

[Discobungle]

I may just be giving up on the LED. I've changed them out. Turned them around and resoldered everything. Thanks for all of the help. I'll come back to it at a later date.