Breakout board question (I know I’ve had many haha)

[Svenson007]

Heyo! Just wondering if you can use a pedal pcb daughter-board when the pcb only has three pads. IN OUT GND. Do you just wire the SW (switch) to ground on 3pdt? SW is just another ground no?
Thanks

 

[BuddytheReow]

I think SW just connects the ground for the LED. I could be wrong

 

[Svenson007]

I think SW just connects the ground for the

I think SW just connects the ground for the LED. I could be wrong

Think this is the case yes. So I’ll try two wires coming from ground on my three lug board IN/OUTGND to ground and switch on pedal pcb daughter board.

 

[fig]

Yep