Build docs for Sproing Deluxe Reverb

[SteveScott]

I see several post about the

Sproing Deluxe Reverb, but on the website it says build documentation coming soon....​

Am I missing something? Or can some one post the build documentation?
Thanks for any help.

 

[Robert]

The completed doc hasn't been posted yet, in the meantime...

Parts list is here:

Sproing Deluxe

Sproing Deluxe Drill Template

forum.pedalpcb.com

Drill template is here:

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_SproingDeluxe.pdf

The wiring is fairly straightforward:

Input/Output jacks connect to the IN/OUT pads at the top of the PCB
9V / GND connect to the +/- pads at the top of the PCB
The two 3PDT breakout boards are pin-for-pin direct connections to the pads at the bottom of the PCB


The only "gotcha" on this one is the two 9mm potentiometers.

 

[SteveScott]

The completed doc hasn't been posted yet, in the meantime...

Parts list is here:

Sproing Deluxe

Sproing Deluxe Drill Template

forum.pedalpcb.com

Drill template is here:

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_SproingDeluxe.pdf

The wiring is fairly straightforward:

Input/Output jacks connect to the IN/OUT pads at the top of the PCB
9V / GND connect to the +/- pads at the top of the PCB
The two 3PDT breakout boards are pin-for-pin direct connections to the pads at the bottom of the PCB


The only "gotcha" on this one is the two 9mm potentiometers.

Thank you so much!

 

[Pedal_man86]

What printer settings am I supposed to use for this? I printed one out and the spacing between the pot/lug centers on the board doesn't match up with the spacing on the template...

 

[Betty Wont]

What printer settings am I supposed to use for this? I printed one out and the spacing between the pot/lug centers on the board doesn't match up with the spacing on the template...

Default. Full page. Check that it isn’t set to a previous scaled job.

 

[Daniel Jacques]

of course it doesn't work when I turn it ON ahah, anyone have the schematic to follow the path and see where I went wrong ?

 

[Jaudon]

of course it doesn't work when I turn it ON ahah, anyone have the schematic to follow the path and see where I went wrong ?

What did the issue end up being?

 

[Jaudon]

Chasing my tail here. One pedal lights up but there's no trem or reverb.. The one I built tonight has GREAT trem effects but no verb!

 

[NY Racer]

Thank you so much!

The completed doc hasn't been posted yet, in the meantime...

Parts list is here:

Sproing Deluxe

Sproing Deluxe Drill Template

forum.pedalpcb.com

Drill template is here:

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_SproingDeluxe.pdf

The wiring is fairly straightforward:

Input/Output jacks connect to the IN/OUT pads at the top of the PCB
9V / GND connect to the +/- pads at the top of the PCB
The two 3PDT breakout boards are pin-for-pin direct connections to the pads at the bottom of the PCB


The only "gotcha" on this one is the two 9mm potentiometers.

Robert, it's been awhile, but looking over the BOM, I don't any reference to where anything goes??? Is there an update for this pedal? Thanks

 

[jimilee]

I know this is beating a dead horse, but the values are on the board.