T themariette New member Oct 29, 2023 #1 Just completed the Clandestine Preamp. When I go to activate it, the light comes on but no audio comes through. Is it my 3PDT switch? Something else? Attachments PXL_20231029_233041347.jpg 294.1 KB · Views: 14 PXL_20231029_223841320.jpg 442.9 KB · Views: 14
Just completed the Clandestine Preamp. When I go to activate it, the light comes on but no audio comes through. Is it my 3PDT switch? Something else?
Solution T T themariette Oct 30, 2023 Solved. It was the 3PDT switch. Must've had a defective one originally. Will test all future 3PDT switches with an Audio Probe.
Solved. It was the 3PDT switch. Must've had a defective one originally. Will test all future 3PDT switches with an Audio Probe.
T themariette New member Oct 30, 2023 #2 Solved. It was the 3PDT switch. Must've had a defective one originally. Will test all future 3PDT switches with an Audio Probe. Upvote 0 Downvote Solution
Solved. It was the 3PDT switch. Must've had a defective one originally. Will test all future 3PDT switches with an Audio Probe.
C comradehoser Active member Nov 1, 2023 #3 You don't have to do all that--just a continuity test will do. However, I've never had a faulty switch (except the one that self destructed when I overheated it). Usually, the issue is my wiring/soldering. Upvote 0 Downvote
You don't have to do all that--just a continuity test will do. However, I've never had a faulty switch (except the one that self destructed when I overheated it). Usually, the issue is my wiring/soldering.