Cornish TES

[cniers13]

Yes... I know this is an absolute moonshot but maybe we can get some pictures of one some how? I know he used to take DD2 and dd3 and mod them but the ones like John mayer's are different. Maybe we can somehow get one into Mr. PedalPCBs hands

 

[Robert]

Coincidentally the DMD-2 is "based on" the DMD-1, which was a one-off approximation (best guess) of the TES I built for someone years ago.

Not a clone, but it was a DD2 with modulation and filtering added.

I'd love to see the real thing. =)

 

[cniers13]

Damn! I haven't seen that before

 

[cniers13]

Let's get one! If we can even find it lol

 

[Robert]

I built two (or three?) of them, then designed what is now the DMD-2 so we could stop destroying DD-2's in the process.

 

[cniers13]

How would you add the dry toggle to the DMD-2? I might go with that if it's close to the TES

 

[cniers13]

And the Tx4 switch? I know the TES has two modes too

 

[Robert]

For the Dry toggle you can just break the signal going to the Mix pot.

The Tx4 switch isn't quite as easy to hack into the existing board.... originally the way that worked was just a second mode on the EEPROM with 1/4 the maximum delay time. This is similar to how the TES works, it switches between the 200mS / 800mS modes of the DD-2.

 

[cniers13]

Possible mod?? Would be awesome to see

 

[Betty Wont]

I've never heard of the TES, but I did coincidentally build the DMD2 with the C Buffer bypass and it's my favorite delay.

 

[TheToneGeek]

best pic I found of the inside without dropping $3,000

 

[fig]

best pic I found of the inside without dropping $3,000

Yeah you probably wouldn't want to drop it.

Nice!

 

[r.callison]

Heckuva charge pump to get 230v

 

[TheToneGeek]

Heckuva charge pump to get 230v

lol I believe that's the wall-wart.. (Yes, Cornish even has his own internal filtered power supply)