Missing Build Docs / Schematics
- Thread starter Robert
- Start date
Matopotato
Active member
Probably this: https://www.musikding.de/LED-Bezel-5mm-chrome-outside-reflector
It was part of the Das Musikding kit, so Klaus would know for sure.
Slight issues getting the board flat on the pots and SPDT and getting the LED pushed down properly, but it is no big deal, looks nice
Robusto
Active member
Can we please get a doc for the full-sized ElectroVibe? After spending $30 on a PCB and a faceplate I hate to go blindly into the build with no schematic or part list or any explanation of how to set the trim pots. I might be able to figure it out, but I don't want to spend $30 to prove myself wrong. Thanks.
Robert
Reverse Engineer
The schematic has already been posted, I'll try to get the rest of the info up for you ASAP.
Robusto
Active member
Thank you
jeffwhitfield
Well-known member
Just got my Topographer board today. Based on the parts listed on the PCB, looks like there's some differences compared to the one AionFX has listed. No doubt the differences are deliberate...but does have me curious. Not sure how close you are to posting the schematics but, if you are close, would love to look at them to study. 
benny_profane
Well-known member
Is the hi/lo switch just a variable R12 then?The Topographer isn't directly based on the IVP like the Aion project, it's based on another boutique pedal that is in turn based on the IVP.
Here's the schematic for your surveying pleasure. (that's right)
Robert
Reverse Engineer
This was the first version, before the Hi/Lo switch was added so I'm not sure... that sounds logical though.
jeffwhitfield
Well-known member
Hola! When you get a chance could you post the schematics for the two Pro-10 pedals? Looking to add a few mods to them (Bass Cut and Mids for Green, Presence for the Blue). Thx!
daveybee123
New member
Any chance the Mofeta schematic will be published soon? I've been thinking about getting it for ages now, but I like to map out what mods I make before I purchase a PCB.
With all caution. I think there is no chance that these and the other schematics that are missing here will ever be published. It's a shame because it takes away a lot of the fun.Hola! When you get a chance could you post the schematics for the two Pro-10 pedals? Looking to add a few mods to them (Bass Cut and Mids for Green, Presence for the Blue). Thx!
Robert
Reverse Engineer
Here's the Tyrian.
There hasn't been any significant changes to the Sanguine PCB.
There hasn't been any significant changes to the Sanguine PCB.
PraisetheSunn0
New member
Yeah I just built mine and would really like a schematic to troubleshoot with.
