Missing Build Docs / Schematics

Have a Whipped Cream OD that seems totally correct but not getting any signal, looking for a schematic/build doc so I can debug. Thanks!!
 
Robert said:
Buffer on input, gain stage on output. (Both LND150 based)

I'll have the schematic posted in a day or two (although it might already be floating around here somewhere).

Waiting on a monitor to arrive for my desktop computer so I can get back to work on docs.
Click to expand...
Hey Again Robert! Can you please upload the schematic for the Equilux? Would like to review before buying the PCB. Thanks again!
 
Robert, any chance the Angry Andy Plus build doc will be available in the near future? I already got the pcb from ya. Thinking about tweaking the boost side a little and could use the schematic. Thanks!
 
Which resistor on the Byzantium Flanger is the LED current limiting resistor?

I use these ultra-bright/high efficiency LEDs that need a bigger CLR. Usually I can deduce the CLR on PPCB boards, but I'm taking the lazy route this time around. :)
 
MattG said:
Which resistor on the Byzantium Flanger is the LED current limiting resistor?

I use these ultra-bright/high efficiency LEDs that need a bigger CLR. Usually I can deduce the CLR on PPCB boards, but I'm taking the lazy route this time around. :)
Click to expand...
Looks like R103
 
Hey Robert, just an FYI there looks to be an error in the Nivel Overdrive documentation where it talks about an IC3 (a 2nd LM833) that isn't on the board. Also in the schematic has the IC3 in the power section that should be labelled IC2
 
Many__Of__Horror said:
Hey Robert, just an FYI there looks to be an error in the Nivel Overdrive documentation where it talks about an IC3 (a 2nd LM833) that isn't on the board. Also in the schematic has the IC3 in the power section that should be labelled IC2
Click to expand...

Thanks for the heads up, it's corrected.

darwin999 said:
@Robert
Just checking that these are on your list for build docs: Crystal Drive & ROG Umble.
Thanks
Click to expand...

Yep, they're on the list. Shouldn't be too much longer, I posted about 60 docs in the past three weeks. 😵‍💫
 
There seems to be a lot of discrepancies surrounding the versions of the Direct Drive / Compact Direct Drive.

I'm going to remove the version number from the product page until I can make some sense out of it for sure.

It is indeed similar to the schematic posted above.


The Canis Drive is also a Direct Drive derivative. Oddly the similarity in names is entirely coincidental. I didn't recognize the circuits until I verified them both on the same day and noticed my BOMs were very similar.
 
You must log in or register to reply here.
Back
Top