Missing Build Docs / Schematics
- Thread starter Robert
- Start date
PapaBear
Well-known member
I think this should work:
You may want to make the center holes a touch smaller for the switches.
DeadAirMD
Well-known member
Thanks Barry, saved that for a remake I'll do in the future. I drilled the enclosure this morning for the Synopsis and Scenario for a 2-in-1. I eyeballed the 2nd lower toggle for the Synopsis and nailed it spot on. I just double printed the drill guide for the Scenario and used that. Ironically, I fudged the drill holes for the top toggles on both. Was 2mm too low. Crammed it all in there and everything fits, but not pretty. As always, it's just for me so not a big deal as long as it eventually fits.
No Chance?
Robert
Reverse Engineer
Of course, it's in queue, there's just a few ahead of it.
Zennmaster
Well-known member
I sat down to build my new Muffinator, and saw that it doesn't have the part values on the silkscreen, and the build docs are still coming soon. Any chance there might be a parts list floating around?
I did my best to search, so I apologize if I missed it.
Thanks!
I did my best to search, so I apologize if I missed it.
Thanks!
chris.knudson
Well-known member
The Muffinator Fuzz is identical to the PedalPCB Muffin Fuzz, with the addition of switchable diodes in each clipping stage. Build documentation for the Muffin Fuzz is here... Download Build Documentation
Robert
Reverse Engineer
EDIT: What he said. 
The BOM is identical to the standard Muffin with the exception of the two added toggle switches and extra diode pairs.
D3/D4 (UP) and D5/D6 (DOWN) are the clipping diodes for the first clipping stage
D1/D2 (UP) and D7/D8 (DOWN) are the clipping diodes for the second clipping stage.
The two toggle switches are SPDT ON/OFF/ON, unless you don't want a "no clipping" option in the center position. In that case, ON/ON.
The BOM is identical to the standard Muffin with the exception of the two added toggle switches and extra diode pairs.
D3/D4 (UP) and D5/D6 (DOWN) are the clipping diodes for the first clipping stage
D1/D2 (UP) and D7/D8 (DOWN) are the clipping diodes for the second clipping stage.
The two toggle switches are SPDT ON/OFF/ON, unless you don't want a "no clipping" option in the center position. In that case, ON/ON.
Zennmaster
Well-known member
Awesome, thank you!
Also awesome, thank you!EDIT: What he said.
The BOM is identical to the standard Muffin with the exception of the two added toggle switches and extra diode pairs.
D3/D4 (UP) and D5/D6 (DOWN) are the clipping diodes for the first clipping stage
D1/D2 (UP) and D7/D8 (DOWN) are the clipping diodes for the second clipping stage.
The two toggle switches are SPDT ON/OFF/ON, unless you don't want a "no clipping" option in the center position. In that case, ON/ON.
VanWhy
Well-known member
Will there be a drill template for the Muffinator? Or Is there something that has the same layout?EDIT: What he said.
The BOM is identical to the standard Muffin with the exception of the two added toggle switches and extra diode pairs.
D3/D4 (UP) and D5/D6 (DOWN) are the clipping diodes for the first clipping stage
D1/D2 (UP) and D7/D8 (DOWN) are the clipping diodes for the second clipping stage.
The two toggle switches are SPDT ON/OFF/ON, unless you don't want a "no clipping" option in the center position. In that case, ON/ON.
Robert
Reverse Engineer
Lytt Effects
Active member
VanWhy
Well-known member
Bump. Curious, any update on this?
Robert
Reverse Engineer
Thank you sir!
dividedzero
New member
what 24LC32A is compatible. I have 2 custom ones (both with 8 effects) I have had made and and extra specialist because I apparently can't read right. Any of those work? I have blanks and a programmer too. Right now it's the only thing missing to make it work