Modded muzzle question

[dlazzarini]

Hi guys. Seeings I have built 2 muzzles I decided to mod one of them per the build docs. My question is what’s the best way to hook all of this up? Does the key input no longer behave like the key input? Do the top input output jacks still go in the loop and the side jacks are my front end inputs. And what about the internal switch settings. What is the signal path doing exactly. Any clarification would be greatly appreciated

 

[Robert]

The only difference is you don't need a splitter in order to use the "Key" input anymore.... you just run the guitar through the Key In / Out and then on to the front of your amp. (or wherever it was going previously)

Nothing else changes, all of the controls still work the same, and you can still use the normal In/Out jacks like you always have.

 

[dlazzarini]

The only difference is you don't need a splitter in order to use the "Key" input anymore.... you just run the guitar through the Key In / Out and then on to the front of your amp. (or wherever it was going previously)

Nothing else changes, all of the controls still work the same, and you can still use the normal In/Out jacks like you always have.

 

[dlazzarini]

Ok thanks