Tim pcb
- Thread starter TubeDude
- Start date
Thks, I've searched their site, its not there. Old links to it do not work either.
joelorigo
Well-known member
That brings me to ask one of those "afraid to ask" questions / subjects. Eagle is a software to create PBC designs? Then the created files are used to fabricate PCBs at places like JLCPCB? What is a "lard?"
Maybe this is the same thing but what is one to do with this kind of thing on the Effects Layouts Blog section like this:
effectslayouts.blogspot.com
Maybe this is the same thing but what is one to do with this kind of thing on the Effects Layouts Blog section like this:
Aclam The Mocker
Here's the Mocker. It's a recreation of the on-board fuzz from the Vox UL730, used by the Beatles on Revolver and a bit on Sgt. Peppers. It'...
effectslayouts.blogspot.com
Harry Klippton
Not Interested
I think madbean has a tim board and it's called the short bus?
Fama
Well-known member
Yes, you got the first part right.That brings me to ask one of those "afraid to ask" questions / subjects. Eagle is a software to create PBC designs? Then the created files are used to fabricate PCBs at places like JLCPCB? What is a "lard?"
Maybe this is the same thing but what is one to do with this kind of thing on the Effects Layouts Blog section like this:
Aclam The Mocker
Here's the Mocker. It's a recreation of the on-board fuzz from the Vox UL730, used by the Beatles on Revolver and a bit on Sgt. Peppers. It'...
The layouts on the left are for perfboard, you basically create the connections with solder (or wire I guess) as shown on the image. Google perfboard and it will make sense. The bottom right is for etching your own PCB at home, I don't know the details but I think you basically transfer that mask (the black part) onto the PCB stock and then etch away the white parts with acid.
joelorigo
Well-known member
Thank you for that.
Regarding using Eagle, is it true that there is some strategy on creating a good PCB layout from a schematic that is independent from learning the ins and outs of the software? I remember several complimentary comments about the layout of @Robert 's PCB here.
Feral Feline
Well-known member
As per jimilee's post above:
MITT BUILD DOC PDF
Yes there are guidelines for laying out a circuit, be it for manufactured PCBs, self-etched PCBs or even perf and vero boards.
Lots of info on the forum about it, seek and yee shall find
MITT BUILD DOC PDF
Yes there are guidelines for laying out a circuit, be it for manufactured PCBs, self-etched PCBs or even perf and vero boards.
Lots of info on the forum about it, seek and yee shall find
I didn't think about emailing, thanks for the info.
Thanks to everyone for the great responses, I'm new here, I appreciate the help.
bean
Legume Liaison
I do. It should correspond to the first version of the Tim (minus the fx loop), although I did include my own clipping mod on the project. Feel free to use the schematic to build your own vero/PCB if you like.
I am trying to register on your madbean site, cant find a way to do it? Help plsI do. It should correspond to the first version of the Tim (minus the fx loop), although I did include my own clipping mod on the project. Feel free to use the schematic to build your own vero/PCB if you like.
Feral Feline
Well-known member
Nothing beats bondage and discipline ...
And yet, everything is beating in bondage and discipline.
