What’s on *YOUR* workbench?
- Thread starter Bricksnbeatles
- Start date
Fama
Well-known member
Hard Bargain by Electric Druid, made a big mistake with the drill holes for Tayda (my mistake completely) but had a try at drilling holes myself and it went fine. Socketed the diodes so I could test things, but I threw in some of the D18 / IS307 USSR NOS diodes I bought a while back and I quite like it like this. I might try taking better pictures and maybe even recording a demo for a build report, but I've also had plans for two other build reports I haven't gotten around to, so don't hold your breath.
Oh, and this picture reminds me I should try carefully scratching out the input and output texts since they're not accurate anyway.
KR Sound
Well-known member
Not much to it!
steviejr92
Authorized Vendor
But knowing that’s it’s off by a little and you have the power to do it correctly, that wouldn’t bother you in the slightest?You guys are building stomp boxes not spaceships, if the radius is a little off no one is going to die and it’s not going to make the news..…
You are very right though these are stomp boxes not spaceships
Paradox916
Well-known member
Technically the “right way “ to do it would be to calculate the setback, tangent lines and k factor, but this is completely overkill for what you are doing, what you are doing is essentially art with a structural purpose, knowing the science behind it is just licensing to knowing what you can get away with, keep it straight, make it strong, make it purdy…But knowing that’s it’s off by a little and you have the power to do it correctly, that wouldn’t bother you in the slightest?
You are very right though these are stomp boxes not spaceships
steviejr92
Authorized Vendor
Well stated.
jessenator
Well-known member
Relaxing afternoon of tagging and bagging BJTs.
Mentaltossflycoon
Well-known member
jimilee
Well-known member
You did all of this today, other than the poly chorus?
DGWVI
Well-known member
Yep!
The longest was the UDD. That things packed
Cybercow
Well-known member
Currently, the following are all awaiting finished enclosures from AmplifyFun . . . . .
1) Decimator II - Noise Reduction/Soft-Gate
2) STFU - Noise Reduction/Soft-Gate
3) As Above So Below - PedalPCB Deflector FV-1 Reverb
4) Headtrip II - MadBean FV-1 Multi-FX (and the finished mock-up - I didn't care for the idea of two stomps on a 125B, so I went with a 1590BB)
5) HAARP - PedalPCB FV-1 Based Arpeggiator (this is going to have the FV-1 Clock Mod incorporated into it)
Build reports coming as they are finished.
1) Decimator II - Noise Reduction/Soft-Gate
2) STFU - Noise Reduction/Soft-Gate
3) As Above So Below - PedalPCB Deflector FV-1 Reverb
4) Headtrip II - MadBean FV-1 Multi-FX (and the finished mock-up - I didn't care for the idea of two stomps on a 125B, so I went with a 1590BB)
5) HAARP - PedalPCB FV-1 Based Arpeggiator (this is going to have the FV-1 Clock Mod incorporated into it)
Build reports coming as they are finished.
Last edited:
Cybercow
Well-known member
I agree. It's a great noise reduction/soft-gate. When I compared it to the STFU, they perform identically to my ears - and with a smaller parts-count. I think the Decimator has a bit more flexibility connection-wise.
Feral Feline
Well-known member
Absolutely nothing on my bench, and I'm ok with that because Im spending my time here instead
View attachment 63250
New thread idea: "What's On The Music Stand?"
A Ditto and an... ANAMORPH!
Feral Feline
Well-known member
I'm struggling with building up enough callous and finger-strength with the fingers I've got... oh, wait. I see, NOT about playing geetar.
