SillyOctpuss
Well-known member
And here's another radio which was too good a deal to pass up. Like the Pye from yesterday it should be here in about a week. It's from 1969
Last edited:
What's in the mailbox? 📬 📦
- Thread starter Harry Klippton
- Start date
Mentaltossflycoon
Well-known member
Lil pink bag day came 2 days early!! I skipped the pic because y'all know what it looks like.
That is a better photo!
I was on the fence about that one!
BuddytheReow
Moderator
2 sets of goodies came over the past few days. Both @finebyfine and @DGWVI both sent me some voltage regulators for my Valhalla build. Thanks guys!
Some Moonn, Bax Rat, diodes, a Fuzz Factory NPN board, opamp rectifier with octave, some diodes, a 1590G(?) enclosure, odd Russian NPN trannies, and some other doodads.
My collection of "shit to make" ever grows...
Some Moonn, Bax Rat, diodes, a Fuzz Factory NPN board, opamp rectifier with octave, some diodes, a 1590G(?) enclosure, odd Russian NPN trannies, and some other doodads.
My collection of "shit to make" ever grows...
DGWVI
Well-known member
Both of those Moonn board will fit in that 1590g - side mount the volume pots and have a nifty 70s box-o-dirt. Metal can opamps for even more mojo
Bricksnbeatles
Member known well
Fuzzcases did a very limited-quantity Black Friday deal on ‘Olivetti’ Marshall Supafuzz replica cases. After a long trip overseas, mine made its way to NY today.
It’ll be a good while before I find just the right mojo bits to make this supa fuzz a box of supa hype. Currently debating between doing a more traditional replica (silver hammertone, traditional lettering aesthetic but with my own name), something a little bit more custom (green or blue hammertone maybe? My own font/logo choices in addition to my own name) or full out technicolor madness with a psychedelic paint job or something along those lines (though that may distract a bit too much from the form of the case)
It’ll be a good while before I find just the right mojo bits to make this supa fuzz a box of supa hype. Currently debating between doing a more traditional replica (silver hammertone, traditional lettering aesthetic but with my own name), something a little bit more custom (green or blue hammertone maybe? My own font/logo choices in addition to my own name) or full out technicolor madness with a psychedelic paint job or something along those lines (though that may distract a bit too much from the form of the case)
benny_profane
Well-known member
- Nice choice with Milwaukee.
- Close it before you hurt yourself.
MobyOctopad
Active member
Nice! Might be a dumb not-question but would be curious to know if you end up using those yellow and orange NPNs in a board somehow: I think one of the Ukrainian sellers on ebay threw a few of these in to a lot I ordered from him a while back but wasn't sure what to do with them
finebyfine
Well-known member
I like them in silicon fuzz faces and other typically low hfe si builds. They’re so cute too. Mojo’s out we’re going for cute components
Passinwind
Well-known member
New computer, new OS, needed a new DAW upgrade. N-Track Studio 10:
My old version was at least 8 years old IIRC. Still $40 for a full upgrade, can't complain!
My old version was at least 8 years old IIRC. Still $40 for a full upgrade, can't complain!
jessenator
Well-known member
I had some major issues with my last order from [redacted] and a minor issue with [redacted]—I'm working through their respective support systems. To calm myself, I put everything away before snapping a pic 
so here's some clutter
so here's some clutter
MBFX
Well-known member
Just got a Matcha, a Booster Pack, and 20 3PDT breakout boards from Hammond Toneworks. I like his circuits, he's a cool guy, we have some quirks in common, and his 3PDT breakout board is my favorite in the business. I like having the LED and LED resistor connect there, because I like my LED to the left of my stomp switch.
@KR Sound I have one too! Probably putting a Green RInger in it. What about you?
@KR Sound I have one too! Probably putting a Green RInger in it. What about you?
