Missing Build Docs / Schematics

Anybody have the drill template for the Kings Hand that they could share? I haven't been able to find another build that has the same kind of layout with the two toggle switches beneath the 2nd row of pots. I know the build docs haven't been posted yet, but any help with just getting a drill template for it would be amazing!
 
Could I get a drill template for the Dielectric boost?
I feel foolish since it’s a 1 knob build but the foot switches and LEDs are a bit wider than the 125B template I have is.
 
Are there Build Docs/Drill template for the Pot and Kettle? I bought it when it was on sale, so if there's been an update since then, I'd need the older build docs. Thanks!
 
Robert said:
Okay, there is about to be an influx of new projects...... but I want to tie up any loose ends first.

Is anyone waiting on any missing build docs / schematics? (Not including the most recent releases, those are already on my list)
Click to expand...
Not sure if it's already been stated or not, but the docs on the Fordobal/ Thorpy the Dane. I was able to get it mostly completed using just the information on the pcb, but wanted to hold off and wait on the drill template, given the close proximity to the pots.
 
I put together my own BOM's because of how I pre-kit my projects. Here's what I took from the silkscreen image on the Fordoble Boost + Drive product page. Hope it's correct and helps.

Fordoble Boost + Drive

Diodes
1N5817 1
1N747A 2
GE 2
1N4148 9

Resistors
47R 1
220R 1
680R 2
1K 1
2K7 1
3K3 1
4K7 3
10K 3
12K 2
15K 1
47K 1
51K 1
100K 2
330K 1
1M 1
2M2 1
10M 1

Sockets
DIP-8 2

MLCC
100p 2
470p 1

Film
4n7 1
10n 1
100n 1
220n 2
470n 1

Electrolytic (25V)
1u 1
2u2 2
100u 2

IC's
OPA2134 2

Pots
A10k 1
A1M 1
B100k 2
C100k 1

Switches
SPDT on-on 1

LED 5mm 2
Enc 1590BB
Knobs 5
 
If it's not too much trouble, could you post the Snozzberry BOM? Trying to make out my parts order before the PCB arrives! :)
 
Drayve85 said:
No problem! Good luck! Hope it sounds great. I’m getting anxious and excited waiting for my Tayda order to arrive so I can build my Fordoble drive, and a pot & kettle. Waiting is the hardest part!!lol
Click to expand...
I think I have everything, minus the two 1N747a's.
I bout screwed the pooch on the two Germanium diodes. I ordered Red Band Soviet Diodes on the recommendation of another poster, and just happened to watch a video last night explaining Soviet diode bands are usually ANODE instead of Cathode... Glad I saw that before I installed them
 
geoffrey said:
Just got my Curds & Whey in the mail :p

Any BOM, Build doc, or drill templates yet?
Click to expand...
Does the PCB have the values printed on it? If so, there's your BoM. This PCB is in the "maybe" pile for me, so I'd like to see a BoM before I commit to it.
 
Last edited:
DAJE said:
Does the PCB should have the values printed on it? If so, there's your BoM. This PCB is in the "maybe" pile for me, so I'd like to see a BoM before I commit to it.
Click to expand...
EffectsLayouts and FuzzDog both have P&C boards and build docs that are probably a safe bet to base a parts order on
 
manfesto said:
EffectsLayouts and FuzzDog both have P&C boards and build docs that are probably a safe bet to base a parts order on
Click to expand...
I did do a search for P&C schematics and confirmed that there's nothing exotic in it, that's all I really needed to know. My other concern is that it's probably not going to fit a Tayda pre-drilled box, so I'll wait till there's a template and see how I feel about it.
 
DAJE said:
I did do a search for P&C schematics and confirmed that there's nothing exotic in it, that's all I really needed to know. My other concern is that it's probably not going to fit a Tayda pre-drilled box, so I'll wait till there's a template and see how I feel about it.
Click to expand...
Oh, yeah, looks like it’s three across the top row and two on the bottom, no real way to retrofit that config on a pre-drilled enclosure.
 
You must log in or register to reply here.
Back
Top