Stock Fuzz board size

[OD is Glorious]

Was going to add this fuzz to my cart, but I want to check the board size. Based on the image the size given (2.35 × 2.15 × 0.5 in) may not be correct.

 

[Robert]

1.95" x 1.35"

 

[OD is Glorious]

1.95" x 1.35"

Thanks, great for 1590a

 

[bluedmc777]

Be aware you have to order a special inductor for the project. I got lucky and found some from smallbear but I had to buy 10. If you need one let me know.

 

[OD is Glorious]

Be aware you have to order a special inductor for the project. I got lucky and found some from smallbear but I had to buy 10. If you need one let me know.

Thanks for letting me know. I am sure I do not have one.

 

[Nic]

Those ?

https://www.taydaelectronics.com/passive-components/inductors/680uh-inductor-ec36.html

 

[Fama]

Is the inductor really necessary?

 

[OD is Glorious]

Is the inductor really necessary?

I am unfamiliar with this component. I will purchase them from Small Bear and let you know

 

[bluedmc777]

Fastron Axial-Lead 680 uH RF Inductor

New England's source for guitar pedals, pedal parts and electronics.

smallbear-electronics.mybigcommerce.com

I’ll send you one if you want @OD is Glorious

 

[OD is Glorious]

Fastron Axial-Lead 680 uH RF Inductor

New England's source for guitar pedals, pedal parts and electronics.

smallbear-electronics.mybigcommerce.com

I’ll send you one if you want @OD is Glorious

Thanks for the offer but I am going to do an order from SB. I want to check out the polished enclosures and I need a few illuminated footswitches.

 

[Fama]

I am unfamiliar with this component. I will purchase them from Small Bear and let you know

Me too, but it's in the power supply section so I assume it is some sort of noise filtering thing? Which sounds like it isn't necessary, at least not all of the time, but then again fuzzes are sometimes prone to picking up noise so who knows.

 

[OD is Glorious]

Me too, but it's in the power supply section so I assume it is some sort of noise filtering thing? Which sounds like it isn't necessary, at least not all of the time, but then again fuzzes are sometimes prone to picking up noise so who knows.

Never thought I would be building and liking so many fuzz circuits

 

[darwin999]

@Robert shunted his inductor on the Stock Fuzz -
See https://forum.pedalpcb.com/threads/whats-on-the-workbench.4225/post-390501

I bought my inductor from Mouser