Used the basic latching relay switching on a commissioned build I recently passed to the “customer”. He told me (and sent a video) that if he leaves the pedals (2 in 1 build) on and kills the power at the board, when he turns the board back on (even after 24hrs) the LEDs on the pedal will be off, but the pedal will still be engaged. Pulling the power from the back of the pedal instead gives the expected results, no power, relay resets to off. He is using a voodoo labs pedal power and I was using a 1spot in my testing. I did not come across this. Any thoughts, or any one experience anything similar?