Thanks! I wondered, but second guessed myself.You'll want to leave C12 in the circuit, otherwise Q3 will affect the bias of Q4.
ThanksCheck out the schematic for the BYOC Big Muff Clone, it adds a switch for the tone control bypass.
largebeaverramsinstructions (byocelectronics.com)
I'm considering adding a tone bypass switch to remove it from the circuit
The Big Muff is a highly modded circuit in the DIY community. Take a look at the build doc: there are 9 separate circuits you can make with the same PCB layout and by only changing the values of certain parts.Isn't tone bypass is a common mod for big muff?
There are tons more versions possible with the pcb and a careful translation of the PedalPCB schematic and the versions listed by Kit Rae.The Big Muff is a highly modded circuit in the DIY community. Take a look at the build doc: there are 9 separate circuits you can make with the same PCB layout and by only changing the values of certain parts.
Are you merely trying to make a 'modded' pedal to say you modded it?
Sounds like the Muff Madness to me…I've built 4 Big Muffs for myself but I ended up ordering 2 more boards and want to try something new, the 2nd is going to a friend and will just build a standard one
Have I lost my mind? Possibly
Isn't tone bypass is a common mod for big muff?