Missing Build Docs / Schematics

[mralanmorgan]

I don't think it matters too much, I need to crack mine open to check what I used. I didn't care too much at the time.

Thanks in advance if you get around to it. Looking back on my B.Y.O.C. builds they used a ton of ceramic disks and 0 box film opting for mylar.

 

[jimilee]

Thanks in advance if you get around to it. Looking back on my B.Y.O.C. builds they used a ton of ceramic disks and 0 box film opting for mylar.

It doesn’t matter which you use.

 

[nickquack]

Cheatsheets for Fordable Drive + Boost, Persian Red Apple, and Octarock Octave available?

 

[NickC]

+1 for Octarock Octave

 

[manfesto]

+1 on the Fordoble Drive, or at least the drill template? Thanks!

 

[Ctrl4Smilerz]

Chop Shop. So many people recommended the Chop Shop in my recent thread, that I figure I've got to build it!

 

[Ctrl4Smilerz]

Protoboard Micro too.

 

[manfesto]

Bump for Fordable Drive docs? Thanks!

 

[DGWVI]

I'd like to humbly request a schem for the OctaRock and Octuplet

 

[Feral Feline]

When is the schematic for the Line6 M13 going to be available?

 

[DGWVI]

When is the schematic for the Line6 M13 going to be available?

Everyone knows that that's just a rehoused and gooped Digitech RP100

 

[KindCanuck]

Could I at least get the drill template for the new Kliche Mini Special Edition? Schematic would be helpful, but not necessary. Thank you!

 

[Robert]

Could I at least get the drill template for the new Kliche Mini Special Edition? Schematic would be helpful, but not necessary. Thank you!

https://docs.pedalpcb.com/project/drill/125B_DrillTemplate_KlicheMini_SE.pdf

 

[MattG]

For the Tellurian Drive, there is an active link for the build docs, but clicking on it returns a 404 not found error. Not sure if that doc is still "coming soon" or if there was a mistake in publishing.

 

[Robert]

Give it a shot now.

 

[MobyOctopad]

Protoboard Micro too.

Going off of the build docs for the test platform to piece together a parts list for the micro protoboard: I think this kind of terminal block and DPDT on/on switch would do the job, but would be good to get confirmation on that. Plus the audio and DC jacks.

 

[iamjackslackof]

Is the schematic for the Dual Effects Loop Switch available anywhere? My preliminary searching of the forum shows some requests for it, but no schematic. Mine is already built or I would just trace the PCB.

Also has the Fordoble BOM been posted?

 

[Kroars]

+1 on the Fordoble Drive, or at least the drill template? Thanks!

The Arkaim drill template looks very similar (layout wise). Think I’ll give that one a shot for the Fordoble.

 

[Robert]

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate_Fordoble.pdf

 

[ALPCDMD]

Would it be possible to have the BOM for the Jack. Thank you